Ubuntu Edgy, dhcp3-server
sudo /etc/init.d/dhcp3-server start
fails, although a simple command line starts the daemon and functions
properly, using the same dhcpd.conf (see below)
I can't make sense of the syslog error message (below). I can't see why
it thinks it should be listening on eth1, which doesn't exist.
[EMAIL PROTECTED]:/etc/dhcp3 $ sudo /etc/init.d/dhcp3-server start
* Starting DHCP server dhcpd3 [fail]
[EMAIL PROTECTED]:/etc/dhcp3 $ sudo /usr/sbin/dhcpd3
Internet Systems Consortium DHCP Server V3.0.4
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
Wrote 0 leases to leases file.
Listening on LPF/eth0/00:0d:88:7e:91:5b/192.16.0/24
Sending on LPF/eth0/00:0d:88:7e:91:5b/192.168.0/24
Sending on Socket/fallback/fallback-net
May 23 00:02:07 localhost dhcpd: Wrote 0 leases to leases file.
May 23 00:02:07 localhost dhcpd:
May 23 00:02:07 localhost dhcpd: No subnet declaration for eth1
(0.0.0.0).
May 23 00:02:07 localhost dhcpd: ** Ignoring requests on eth1. If this
is not what
May 23 00:02:07 localhost dhcpd: you want, please write a subnet
declaration
May 23 00:02:07 localhost dhcpd: in your dhcpd.conf file for the
network segment
May 23 00:02:07 localhost dhcpd: to which interface eth1 is attached.
**
May 23 00:02:07 localhost dhcpd:
May 23 00:02:07 localhost dhcpd:
May 23 00:02:07 localhost dhcpd: Not configured to listen on any
interfaces!
--
SLUG - Sydney Linux User's Group Mailing List - http://slug.org.au/
Subscription info and FAQs: http://slug.org.au/faq/mailinglists.html
