On Wed, August 31, 2011 8:50 am, Martin Visser wrote:
> if your cameras are say 192.168.1.101, 192.168.1.102, 192.168.1.103 you
> need to setup a separate port forward for each, or application. So you
> might create WebCam1 with Protocol TCP, Port 80 and Map to Host port 8101,
Martin,
thanks, one of my configs was incorrect (but the other one wasn't, [2wire,
2way bet]).
OK, 2wire shows:
Device Allowed Applications Application Type Protocol Port Public IP
cacti Web Server - TCP 80 111.222.333.444
SSH Server - TCP 22 111.222.333.444
cam10 cam10 - TCP 8010 111.222.333.444
do I need to do anything in Apache conf on cacti above ?
when I nmap I get:
Starting Nmap 5.00 ( http://nmap.org ) at 2011-08-31 14:57 EST
Interesting ports on 111.222.333.444:
Not shown: 995 closed ports
PORT STATE SERVICE
22/tcp open ssh
80/tcp open http
139/tcp filtered netbios-ssn
179/tcp filtered bgp
445/tcp filtered microsoft-ds
Nmap done: 1 IP address (1 host up) scanned in 48.59 seconds
at one point whilst fiddling with different variants I noticed this:
---
Not shown: 994 closed ports
PORT STATE SERVICE
22/tcp open ssh
80/tcp open http
139/tcp filtered netbios-ssn
179/tcp filtered bgp
445/tcp filtered microsoft-ds
8010/tcp filtered xmpp
---
maybe.. whilst I was attempting to connect from browser..?
--
Voytek
--
SLUG - Sydney Linux User's Group Mailing List - http://slug.org.au/
Subscription info and FAQs: http://slug.org.au/faq/mailinglists.html
