Hi All
is there a specific configure option to build the
acct_gather_energy/ipmi plugin?
I'm using Slurm 14.03.0 and I'm trying to configure
acct_gather_energy/ipmi with the following settings in slurm.conf
JobAcctGatherType=jobacct_gather/linux
JobAcctGatherFrequency=30
AcctGatherEnergyType=acct_gather_energy/ipmi
and the following in acct_gather.conf
EnergyIPMIFrequency=30
EnergyIPMICalcAdjustment=yes
EnergyIPMIUsername=****
EnergyIPMIPassword=****
it seems to accept the configuration:
# scontrol show config
Configuration data as of 2014-11-06T15:34:26
. . .
AcctGatherEnergyType = acct_gather_energy/ipmi
. . .
JobAcctGatherFrequency = 30
JobAcctGatherType = jobacct_gather/linux
However when I run a job I get the following in the logs on the slave nodes:
[2014-11-06T15:17:20.727] Launching batch job 1055 for UID 1000
[2014-11-06T15:17:20.739] Received cpu frequency information for 16 cpus
[2014-11-06T15:17:20.743] Couldn't find the specified plugin name for
acct_gather_energy/ipmi looking at all files
[2014-11-06T15:17:20.766] cannot find acct_gather_energy plugin for
acct_gather_energy/ipmi
[2014-11-06T15:17:20.766] cannot create acct_gather_energy context for
acct_gather_energy/ipmi
[2014-11-06T15:17:20.768] Couldn't find the specified plugin name for
acct_gather_energy/ipmi looking at all files
[2014-11-06T15:17:20.769] cannot find acct_gather_energy plugin for
acct_gather_energy/ipmi
[2014-11-06T15:17:20.769] cannot create acct_gather_energy context for
acct_gather_energy/ipmi
[2014-11-06T15:17:20.770] WARNING: We will use a much slower algorithm
with proctrack/pgid, use Proctracktype=proctrack/linuxproc or some other
proctrack when using jobacct_gather/linux
[2014-11-06T15:17:20.771] [1055] gres/mic unable to set OFFLOAD_DEVICES,
no device files configured
[2014-11-06T15:17:20.823] [1055] Couldn't find the specified plugin name
for acct_gather_energy/ipmi looking at all files
[2014-11-06T15:17:20.825] [1055] cannot find acct_gather_energy plugin
for acct_gather_energy/ipmi
[2014-11-06T15:17:20.826] [1055] cannot create acct_gather_energy
context for acct_gather_energy/ipmi
[2014-11-06T15:17:21.843] [1055] Couldn't find the specified plugin name
for acct_gather_energy/ipmi looking at all files
[2014-11-06T15:17:21.845] [1055] cannot find acct_gather_energy plugin
for acct_gather_energy/ipmi
[2014-11-06T15:17:21.845] [1055] cannot create acct_gather_energy
context for acct_gather_energy/ipmi
[2014-11-06T15:17:41.771] [1055] *** JOB 1055 CANCELLED AT
2014-11-06T15:17:41 ***
[2014-11-06T15:17:41.829] [1055] sending REQUEST_COMPLETE_BATCH_SCRIPT,
error:0 status 15
[2014-11-06T15:17:41.831] [1055] done with job
I can get power reporting with both the ipmi-sensors and ipmi-dcmi commands
# ipmi-sensors --non-abbreviated-units | grep Watts
95 | Pwr Consumption | Current | 126.00 |
Watts | 'OK'
# ipmi-dcmi --get-system-power-statistics
Current Power : 140 Watts
Minimum Power over sampling duration : 72 watts
Maximum Power over sampling duration : 361 watts
Average Power over sampling duration : 132 watts
Time Stamp : 11/06/2014 - 12:39:20
Statistics reporting time period : 1270838 milliseconds
Power Measurement : Active
I'm obviously missing something but I cannot find anything more in the
documentation
Thanks
Antony
