Hi Juergen,

Thanks for the hint,
I tried to set it to "no" as well but the result was the same.

Best regards,
Michael

Dr. Michael Neff
System Engineer
System Integration and Support                                                  
                          
NEC Deutschland GmbH                                                            
                             
HPCE Division                                                                   
                                         

Raiffeisenstr. 14, D-70771 Leinfelden-Echterdingen, Germany      
Tel: +49 711 780 55 44
Mobil: 0152 22 85 15 54
Fax: +49 711 780 55 25
------------------------------------------------------------------------------
NEC Deutschland GmbH, Fritz-Vomfelde-Straße 14-16, D-40547 Duesseldorf, Germany
Geschäftsführer: Yuichi Kojima     Handelsregister Düsseldorf HRB 579413


-----Ursprüngliche Nachricht-----
Von: slurm-users [mailto:[email protected]] Im Auftrag von 
Juergen Salk
Gesendet: Friday, January 17, 2020 12:23 PM
An: Slurm User Community List <[email protected]>
Betreff: Re: [slurm-users] Question concerning cgroups and

Hi Michael,

not sure if this is the root cause of your problem, but SchedMD recommends to 
set TaskAffinity to "no" in cgroup.conf when using both, task/affinity and 
task/cgroup, together for TaskPlugin in slurm.conf (see the NOTE for TaskPlugin 
in slurm.conf).

Best regards
Juergen Salk

--
Jürgen Salk
Scientific Software & Compute Services (SSCS)
Kommunikations- und Informationszentrum (kiz) Universität Ulm
Telefon: +49 (0)731 50-22478
Telefax: +49 (0)731 50-22471

* Michael Neff <[email protected]> [200117 09:24]:
> Hi,
> 
> I am currently trying to set up Slurm  19.05.05 under centos 7.5 with the 
> settings below.
> 
> ProctrackType=proctrack/cgroup
> TaskPlugin=task/cgroup,task/affinity
> TaskPluginParam=Cpusets,Autobind=Threads
> SelectType=select/cons_res
> SelectTypeParameters=CR_One_Task_Per_Core,CR_Core,CR_Pack_Nodes
> 
> ###
> # Slurm cgroup support configuration file ### CgroupAutomount=yes 
> CgroupMountpoint=/sys/fs/cgroup ConstrainCores=yes TaskAffinity=yes #
> 
> I always end up with all tasks  for a node running on one core.
> 
> Any suggestions?
> 
> Best regards,
> Michael
> 
> 
> Dr. Michael Neff
> System Engineer
> System Integration and Support
> NEC Deutschland GmbH
> HPCE Division
> 
> Raiffeisenstr. 14, D-70771 Leinfelden-Echterdingen, Germany
> Tel: +49 711 780 55 44
> Mobil: 0152 22 85 15 54
> Fax: +49 711 780 55 25
> ----------------------------------------------------------------------
> -------- NEC Deutschland GmbH, Fritz-Vomfelde-Straße 14-16, D-40547 
> Duesseldorf, Germany
> Geschäftsführer: Yuichi Kojima     Handelsregister Düsseldorf HRB 579413
> 

--
GPG A997BA7A | 87FC DA31 5F00 C885 0DC3  E28F BD0D 4B33 A997 BA7A



 Click 
https://www.mailcontrol.com/sr/1IdckDpNbhnGX2PQPOmvUg0KooX_PhOy-P-tSTpQZHNsvYqJkvaZzH8E9SrNAJI_zsDxTZSiem894h7CChK4GQ==
  to report this email as spam.

Reply via email to