It won't figure it out automatically no. You will need to ensure that
the spec is installing to the same locale as your vendor installed it if
they didn't put it in the default location (/opt isn't the default).
-Paul Edmon-
On 12/4/2020 3:39 PM, Jason Simms wrote:
Dear Ole,
Thanks. I've read through your docs many times. The relevant upgrade
section begins with the assumption that you have properly configured
RPMs, so all I'm trying to do is ensure I get to that point. As I
noted, a vendor installed Slurm initially through a
proprietary script, though they did base it off of created RPMs. I've
reached out to them to see whether they used a modified slurm.spec
file, which I suspect they did, given that Slurm is installed in
/opt/slurm (which seems like a modified prefix, if nothing else).
The fundamental question is, if I am performing a yum update, and I
don't adjust any settings in the default slurm.spec file, will it
upgrade everything properly where they currently "live," or will it
install new files in standard locations? It's a question of whether
"yum update" is "smart enough" to figure out what was done before and
go with that, or whether I must specify all relevant information in
the slurm.spec file each time? Based on Paul's reply, it seems we do
need an updated slurm.spec file that reflects our environment, each
time we upgrade.
Jason
On Fri, Dec 4, 2020 at 3:13 PM Ole Holm Nielsen
<ole.h.niel...@fysik.dtu.dk <mailto:ole.h.niel...@fysik.dtu.dk>> wrote:
Hi Jason,
Slurm upgrading should be pretty simple, IMHO. I've been through
this
multiple times, and my Slurm Wiki has detailed upgrade documentation:
https://wiki.fysik.dtu.dk/niflheim/Slurm_installation#upgrading-slurm
<https://wiki.fysik.dtu.dk/niflheim/Slurm_installation#upgrading-slurm>
Building RPMs is described in this page as well:
https://wiki.fysik.dtu.dk/niflheim/Slurm_installation#build-slurm-rpms
<https://wiki.fysik.dtu.dk/niflheim/Slurm_installation#build-slurm-rpms>
I hope this helps.
/Ole
On 04-12-2020 20:36, Jason Simms wrote:
> Thank you for being such a helpful resource for All Things Slurm; I
> sincerely appreciate the helpful feedback. Right now, we are
running
> 20.02 and considering upgrading to 20.11 during our next
maintenance
> window in January. This will be the first time we have upgraded
Slurm,
> so understandably we are somewhat nervous and have some questions.
>
> I am able to download the source and build RPMs successfully.
What is
> unclear to me is whether I have to adjust anything in the
slurm.spec
> file or use a .rpmmacros file to control certain aspects of the
> installation. Since this would be an upgrade, rather than a new
install,
> do I have to adjust, e.g., the --prefix value, and all other
settings
> (X11 support, etc.)? Or, will a yum update "correctly" put the
files
> where they are on my system, using settings from the existing
20.02 version?
>
> We purchased the system from a vendor, and of course they use
custom
> scripts to build and install Slurm, and those are tailored for an
> initial installation, not an upgrade. Their advice to us was, don't
> upgrade if you don't need to, which seems reasonable, except
that many
> of you respond to initial requests for help by recommending an
upgrade.
> And in any case, Slurm doesn't upgrade nicely from more than two
major
> versions back, so I'm hesitant to go too long without patching.
>
> I'm terribly sorry for my ignorance of all this. But I really
lament how
> terrible most resources are about all this. They assume that you
have
> built the RPMs already, without offering any real guidance as to
how to
> adjust relevant options, or even whether that is a requirement
for an
> upgrade vs. a fresh installation.
>
> Any guidance would be most welcome.
--
*Jason L. Simms, Ph.D., M.P.H.*
Manager of Research and High-Performance Computing
XSEDE Campus Champion
Lafayette College
Information Technology Services
710 Sullivan Rd | Easton, PA 18042
Office: 112 Skillman Library
p: (610) 330-5632
