Jeremy,
Please let me know the part number of the power adaptor.  When
re-associates again, can you see the previous values set on the
simplemonitor?

Seeni, SB support

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jeremy Oswalt
Sent: Saturday, June 07, 2003 1:44 AM
To: '[EMAIL PROTECTED]'
Subject: RE: [smartBridges] Disassociations?

They are using the cable provided with the ABO.  This install is pretty
simple.  I didn't do any jerry rigging on it.  I just used the
"out-of-the-box" install.

-- 
Jeremy

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Seeni
Sent: Friday, June 06, 2003 1:32 PM
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges] Disassociations?


Please check the Ethernet cable length between ABO and switch. 
In case you need to power the device with CAT5 Cable lengths greater
than 160 feet or 50 meters (to a maximum of 327 feet or 100 meters) then
a DC power supply adapter of output voltage between 15V DC and 18V DC
needs to be procured independently from third party sources. 
The supplied standard 12V DC power adapter can power the devices up to
160 feet or 50 meters only with standard CAT5 Cables.
Below is the ideal installation guide for your reference.
http://www.smartbridges.com/pdf/ideal_installation_guide.pdf

Seeni,  SB support

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jeremy Oswalt
Sent: Friday, June 06, 2003 8:45 PM
To: '[EMAIL PROTECTED]'
Subject: [smartBridges] Disassociations?

I have a client whose Airbridge Outdoor always seems to disassociate but
won't reassociate until they reboot the radio.  It's a company and they
have a netgear router in front of the Airbridge.  It never fails.  It'll
drop off and then they have to reboot the radio to bring it back online.
They have a reasonable signal, so this is not an issue.

They have the latest firmware.

-- 
Jeremy

 


The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://198.63.203.6  


The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://198.63.203.6  


The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://198.63.203.6  


The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://198.63.203.6  

Reply via email to