I am looking at using one from Panamax right now, but the voltage shut down is 19v, I am scared this is too close to the 18v power supply I'll be using Still have not found a source for 18v power supplies also
joe -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Robin McCaig Sent: Tuesday, May 27, 2003 3:06 PM To: [EMAIL PROTECTED] Subject: [smartBridges] InLine Ethernet Surge Protector I have a APC PNET1 inline surge protector, I was wondering if I could place it between the Powershot adapter and the Airbridge Outdoor unit for extra surge protection. I plugged it up and the radio came on and the Ethernet port both on the pc and the radio worked, but I don't want to install it until I know for sure that there is not going to be any issues with it. I believe it protects all 8 wires and the cutover is like 6 Volts but Im not sure how it works really. Any info would be helpful. Robin The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6 The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
