>From which segment did you test the ARP cache, from LAN or WAN? If you test from the WAN side, you may not able to see the MAC address of the Linksys router. Please test it from the LAN segment you can see the ARP table with router's MAC address. Try deleting ARP cache (arp -d *) entries and ping the gateway 192.168.1.1 and check the ARP cache now. You will be able to see the MAC address of the Gateway Router.
Seeni -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Adam Kujawski Sent: Friday, May 30, 2003 2:02 AM To: '[EMAIL PROTECTED]' Subject: [smartBridges] ARP Question We have an AirBridge Total at a customer site with a Linksys broadband gateway behind it. For illustration purposes, let's say the AirBridge's management IP is 10.1.2.3, and the customer's NAT gateway is 192.168.1.1. On our router that feeds the wireless network, the ARP cache shows that both 10.1.2.3 and 192.168.1.1 are associated with the SmartBridge's hardware address. The Linksys's hardware address does not appear in the ARP cache - instead, the SmartBridge's MAC address appears in its place. Is this normal, and if so, why is it done this way? -Adam -- Adam Kujawski [EMAIL PROTECTED] Network Administrator Cell: 419.261.3268 Amplex Internet Services Office: 419.720.3635 The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6 The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
