Ahhh. You have: A: Water in something B: Interference C: multipath D: You are as dense as I was this week and managed to put all 4 ap's in town on the same channel! sigh.....
In that order. Could be something else but I'd be surprized if it is. marlon ----- Original Message ----- From: "Support(at)inet2000.com" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, May 30, 2003 1:50 PM Subject: Re: [smartBridges] Fixed Rate Speeds > Perhaps I didn't make my question clear. When I look at the > connections from my AccessPoint (StarOS) it shows my airBridge > client's connection changing from 1 to 2 to 11 Mbit, even though > the airBridge is fixed at 2 Mbit. Every time the airBridge changes > speeds, there is a temporary delay in data transfers, so I wanted > to set the speed and fix it there. However, the AccessPoint seems > to think it keeps switching up and down in speed anyway. > - Todd Chamberlain > > From: "Seeni" <[EMAIL PROTECTED]> > > How did you see from the Access Point?. airBridge operates only at the > > set speed. AutoFallRate will achieve better throughput and it is > > recommended. > > > > Seeni > > > > Support(at)inet2000.com > > Hello. Do you have an answer to this? I want to know why > > when I fix the speed at 1 or 2 Mbit (and I turn off the autorate) > > why the Access Point still shows the airBridge Outdoor client > > jumping from 1 all the way to 11 Mbit? > > - Todd > > > > ----- Original Message ----- > > From: "Vasu (sB Tech Team)" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Thursday, May 29, 2003 11:24 AM > > Subject: RE: [smartBridges] Fixed Rate Speeds > > > > > > > The set speed is to determine what is the maximum limit of throughput > > > you can have on a link, Have the AutoFallBack Rate enabled so that if > > > the set speed is not achieved then the connection does not get dropped > > > off, > > > > > > Vasu > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] On Behalf Of > > > Support(at)inet2000.com > > > Sent: Friday, May 30, 2003 1:16 AM > > > To: '[EMAIL PROTECTED]' > > > Subject: [smartBridges] Fixed Rate Speeds > > > > > > When I set my airBridge Outdoor to 1 or 2 Mbit fixed > > > rate, and turn off the autorate fallback, my Access Point > > > still shows it changing up and down from 1 to 11 Mbit. > > > Is this a problem with my StarOS Access Point or with > > > the SmartBridge not staying at it's set speed? > > > - Todd > > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
