Is there anyone willing to start a flow chart with options and post it for more ideas?
Bill
At 08:45 AM 6/4/2003 -0600, you wrote:
Yes.. Exactly same problems I have. with NEWEST firmware.
cheers,
Paul
-----
Paul C. Murdock [EMAIL PROTECTED]
mobile/801.864.1024 - fax/801.446.0130
www.paulmurdock.com - for more info
- -----Original Message-----
- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of phantam
- Sent: Wednesday, June 04, 2003 8:36 AM
- To: '[EMAIL PROTECTED]'
- Subject: RE: [smartBridges] Firmware Downgrade
- True, ye I have noticed that the AB's still freeze occasionally or loose association according to clients they have to power cycle every so often and then it works great.
- Chris
- -----Original Message-----
- From: Scott Pilz [mailto:[EMAIL PROTECTED]]
- Sent: Wednesday, June 04, 2003 9:31 AM
- To: '[EMAIL PROTECTED]'
- Chris, what is freezing ?
- We've had about the same luck here with V:0.01.04.. I think the
- reason people are having problems with 0.01.04 is primarily due to the
- fact they are setup and used to using a transparent bridge. I actually
- LIKE the changes in 0.01.04.. Less work when a customer decides to swap a
- NIC/WiFi card.
- Scott
- On Tue, 3 Jun 2003, phantam wrote:
- > What problems for gods sake I have 120 airBridges deployed and guess what?
- > All with 1.5 firmware and it's working great , I can monitor have no
- > problems except occasional freezing? Maybe this will be fixed better in next
- > version. Even the power issue that everyone has been having problems with
- > seems to be very seldomely apparent in my installs. Perhaps the problem
- > isn't entirely Smartbridges fault.
- >
- > Chris
- >
- > -----Original Message-----
- > From: Scott Damron [mailto:[EMAIL PROTECTED]]
- > Sent: Tuesday, June 03, 2003 7:53 PM
- > To: [EMAIL PROTECTED]
- >
- > Yes,
- >
- > It don't work!!! I have tried it on 3 of the last "Indoor" airbridges
- > we bought, after many problems with the newer firmware, and it just
- > don't work!!!
- >
- > Scott
- >
- > -----Original Message-----
- > From: [EMAIL PROTECTED]
- > [mailto:[EMAIL PROTECTED]] On Behalf Of Jack Berridge
- > Sent: Tuesday, June 03, 2003 11:57 AM
- > To: [EMAIL PROTECTED]
- > Subject: [smartBridges] Firmware Downgrade
- >
- >
- > Because of the lack of stability with current Smartbridges AirBridge
- > Outdoor Firmware, we are going to begin downgrading our firmware to the
- > last stable release. Others have already done this. I'm curious if
- > there
- > are any quirks discovered while downgrading your firmware from the
- > current
- > rev to the last stable rev? Where you able to successfully do this
- > "remotely" (although remote, we will still be on the same LAN broadcast
- > domain segment --- just not at each customers site)?
- >
- > Also, did you downgrade the APPO units as well or just the ABO units?
- > We
- > are thinking we only need to downgrade the ABO units but we may be
- > incorrect with this assumption.
- >
- > Any insight on the process(es) used by others to allow you to
- > successfully
- > downgrade your firmware would be greatly appreciated.
- >
- > Thanks much.
- >
- >
- >
- > Jack
- >
- > The PART-15.ORG smartBridges Discussion List
- > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
- > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in
- > the body type unsubscribe smartBridges)
- > Archives: http://198.63.203.6
- >
- >
- > The PART-15.ORG smartBridges Discussion List
- > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
- > smartBridges <yournickname>
- > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
- > smartBridges)
- > Archives: http://198.63.203.6
- >
- The PART-15.ORG smartBridges Discussion List
- To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
- To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
- Archives: http://198.63.203.6
AirRunner Networks LLC --- We make the web fast!
If you get tired of the wait call 715-443-3700!
