Ryan answer is exactly correct.  Thanks Ryan.

Jerry,
Please let us know what type of wireless client devices you are using.
Actually the MAC address table entry is only for the wireless client
devices and it is not for any PCs MAC address.  
Please let us know, if you need any more information.

Thanks

Seeni,  SB support


-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Ryan Whalen
Sent: Thursday, June 12, 2003 5:12 AM
To: '[EMAIL PROTECTED]'
Subject: Re: [smartBridges] Using internal MAC Authorization?

It depends which type of CPE you are using.  The older version of the
airBridge firmware passed the MAC of the clients NIC, but the newer
versions w/ the remote management only pass the MAC of the airBridge
itself.
In short, if you are using new version smartBridge devices, then you
only
need the MAC of the sB in your table.  Other devices may vary, so its
best
to test them out before hand and figure out what MAC's you need to
gather
from the customer.
Ryan

> A question I am having is do I onlu need to add the mac addresses of
> the radios? Or do I have to put the macs of the routers/nic/etc behind
> the radio? I have some customers that use cisco wgb and when I log in
> to the br340 it shows all the eclients. I am replacing all my access
> points with app and was thinking about making a file all radio macs to
> just upload on all the app's. Stop at the radio or get all macs for
> everything and enter them into the radios?
>
> Am I wasting my time with this or should I just keep Authorization
> disabled?
>
> Thank you,
> Jerry



The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://198.63.203.6  


The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://198.63.203.6  

Reply via email to