Yes, I thought resetting to the factory default. In
order to do the power reset, your method is correct.
Thanks Chris,
Seeni, SB support
-----Original Message-----
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of phantam
Sent: Friday, June 13, 2003 1:16
PM
To: '[EMAIL PROTECTED]'
Subject: RE: [smartBridges]
Resetting an APPO
Ye I think he miss understood what you meant yes just
either disconnect the female->male connector on the powershot for a second
or pull out the ethernet from the APPO -> POE
-----Original Message-----
From: Jerry Olney [mailto:[EMAIL PROTECTED]]
Sent: Friday, June 13, 2003 1:12 AM
To: [EMAIL PROTECTED]
At 10:46 AM 06/13/2003 +0800, you wrote:
>Please use the smartBridges
powershot to reset the APPO by remotely.
>Here is the link.
>http://www.smartbridges.com/new/products/ps.php
>
>Seeni, SB support
Unfortunately this not only resets the APPO but also
sets it back to
factory default setting thereby
requiring it to be reprogrammed (which may
or may not be a trivial
task). Wouldn't it reset the APPO if the power
were simply removed for a few
seconds and then restored?
Jerry
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body
type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body
type unsubscribe smartBridges)
Archives: http://198.63.203.6
