Try to move the antenna around a little bit. Reflections can also cause low LQ. By moving the antenna, you may find a spot that picks up only the primary signal.
Nish -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark P. Sullivan Sent: Wednesday, June 18, 2003 11:50 AM To: '[EMAIL PROTECTED]' Subject: [smartBridges] Link Quality does not exceed 90% ever For those of you graphing/tracking your client LQ, are any of your clients averaging above 90% Link Quality?? Several of my clients are at 100% RSSI, but still only 87% LQ. I do have one or two clients that are at 92 and 93%, but most are at 86-88% with RSSI of 100%. Any clues as to why?? I have sniffed this entire area using grasshopper, airMagnet, Netstumbler, and Sniffer Pro....with NO interference. It appears as though the units just can't handle better than 90% (93%) LQ?? Sully The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6 The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
