Tonight I went to two of my customer's homes to re-associate their airbridges. When I got there the ESSID had changed from logan-wt to something like ZUCimkXZ and the BSSID was all zeros. Earlier this weekend another customer with an airbridge outdoor had the same thing happen. His ESSID changed from logan-wt to some jumble of letters.
Got any idea what is causing this to happen? There are about 30 people on that AP (logan-wt). All three of these people are on the logan-wt AP. As far as I know they are the only three that lost association, but this is the third time in a month or so that it's happened. Are these defective Airbridges? Their RSSI is > 50% and the Link quality is close to 80%. They are at most six miles from the AP, and one of them is only a couple of miles away from the AP. Should I get an rma for these or do you think there is something else causing this? They are all using 1.50 of the firmware, though I did have the man with the outdoor airbridge backrev to 1.43 to see if that will help. Thanks Sam Morris, Owner Loganet Internet Service Logan IA The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
