I'm with you on that one...i do not think Netstumbler will work w/ an airBridge as it stands now. However, I believe that this is something Netstumbler would need to add to their software...nothing smartBridges can really control. -Ryan
> Sorry for being confused, but if I am ONLY connected to the smartbridge > via an ethernet cable (and no other wireless device on my computer), > netstumbler will actually tell the smart bridge to scan all channels > continuously? I thought it could only do that to devices PHYSICALLY > attached to the machine (i.e. my machine is driving the radios...) > realize that as far as my machine knows, the thing on the other end of > that ethernet cable is a wired router, so how does netstumbler know? My > bad if wrong, but I am sure I played with this and actually had to > have the radio attached to my machine. (not just connected to it by > ethernet) > > Scott > > > -----Original Message----- > From: scott damron <[EMAIL PROTECTED]> > To: [EMAIL PROTECTED] > Date: Mon, 23 Jun 2003 14:15:13 -0500 > Subject: RE: [smartBridges] Site Survey > >> Netstumbler will by default detect any wireless devices connected via >> the >> network you are attached to via wireless. >> >> Scott >> >> Quoting shoffman <[EMAIL PROTECTED]>: >> >> *<*>* How about a way to link netstumbler through to the Radio via >> ethernet? >> *<*>* That would be good enough for me... (i.e. I could use the SB >> device as >> *<*>* the radio Netstumbler is using.... >> *<*>* >> *<*>* Scott >> *<*>* >> *<*>* >> *<*>* -----Original Message----- >> *<*>* From: "Seeni" <[EMAIL PROTECTED]> >> *<*>* To: <[EMAIL PROTECTED]> >> *<*>* Date: Tue, 24 Jun 2003 02:46:47 +0800 >> *<*>* Subject: RE: [smartBridges] Site Survey >> *<*>* >> *<*>* > Hi Mark, >> *<*>* > >> *<*>* > >> *<*>* > >> *<*>* > Yes, at the moment we do not have the spectrum survey tool. >> Yes, I >> *<*>* > appreciate your suggestion and I will send your suggestion to >> our >> *<*>* > development team for their consideration. >> *<*>* > >> *<*>* > Thank you and appreciate your suggestion. >> *<*>* > >> *<*>* > >> *<*>* > >> *<*>* > Seeni, SB support >> *<*>* > >> *<*>* > >> *<*>* > >> *<*>* > -----Original Message----- >> *<*>* > From: [EMAIL PROTECTED] >> *<*>* > [mailto:[EMAIL PROTECTED] On Behalf Of Mark >> Koskenmaki >> *<*>* > Sent: Tuesday, June 24, 2003 2:18 AM >> *<*>* > To: '[EMAIL PROTECTED]' >> *<*>* > Subject: Re: [smartBridges] Site Survey >> *<*>* > >> *<*>* > >> *<*>* > >> *<*>* > Please accept my apologies for being unclear. >> *<*>* > >> *<*>* > >> *<*>* > >> *<*>* > I do not mean a AP survey, I mean a spectrum survey, as shown >> in the >> *<*>* > link I provided. Teletronics and Demarc equipment have these >> *<*>* > utilities >> *<*>* > for thier equipment, but I don't wish to buy thier equipment, >> just for >> *<*>* > that capability. It would extremely helpful to have this >> built into >> *<*>* > all outdoor or outdoor capable equipment, so that EVERY >> customer and >> *<*>* > install can be easily surveyed for spectrum use issues before >> AND >> *<*>* after >> *<*>* > install. >> *<*>* > >> *<*>* > >> *<*>* > >> *<*>* > The link below contains examples of how this is used. >> *<*>* > >> *<*>* > http://www.odessaoffice.com/wireless/survey.htm >> *<*>* > >> *<*>* > >> *<*>* > >> *<*>* > This is a request for something that does not exist in your >> software >> *<*>* at >> *<*>* > present. >> *<*>* > >> *<*>* > >> *<*>* > >> *<*>* > Thank you for your quick response. >> *<*>* > >> *<*>* > >> *<*>* > >> *<*>* > Mark >> *<*>* > >> *<*>* > >> *<*>* > >> *<*>* > >> *<*>* > >> *<*>* > >> *<*>* > >> *<*>* > >> *<*>* > >> *<*>* > NEOFAST.NET >> *<*>* > North >> *<*>* > East >> *<*>* > Oregon >> *<*>* > FAST >> *<*>* > Net >> *<*>* > mark(at)neofast.net >> *<*>* > >> *<*>* > ----- Original Message ----- >> *<*>* > >> *<*>* > From: Seeni <mailto:[EMAIL PROTECTED]> >> *<*>* > >> *<*>* > To: [EMAIL PROTECTED] >> *<*>* > >> *<*>* > Sent: Monday, June 23, 2003 10:48 AM >> *<*>* > >> *<*>* > Subject: RE: [smartBridges] Site Survey >> *<*>* > >> *<*>* > >> *<*>* > >> *<*>* > >> *<*>* > >> *<*>* > Hi mark, >> *<*>* > >> *<*>* > The site survey allows you to associate with airbridge with >> any *<*>* > available Access points on the LAN(infrastructure mode) or >> with *<*>* > different wireless clients(Adhoc mode) >> *<*>* > >> *<*>* > Please see our device simplemonitor's site survey and link >> status >> *<*>* tool. >> *<*>* > >> *<*>* > The Link status shows that actual LQ and RSSI values by >> graphical >> *<*>* > method(received signal strength indicator) >> *<*>* > >> *<*>* > >> *<*>* > --- >> *<*>* > Outgoing mail is certified Virus Free. >> *<*>* > Checked by AVG anti-virus system (http://www.grisoft.com). >> *<*>* > Version: 6.0.491 / Virus Database: 290 - Release Date: 6/18/03 >> *<*>* > >> *<*>* > >> *<*>* >> *<*>* The PART-15.ORG smartBridges Discussion List >> *<*>* To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe >> *<*>* smartBridges <yournickname> >> *<*>* To Remove: mailto:[EMAIL PROTECTED] (in the body type >> unsubscribe >> *<*>* smartBridges) >> *<*>* Archives: http://198.63.203.6 >> *<*>* >> *<*>* >> >> >> >> The PART-15.ORG smartBridges Discussion List >> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe >> smartBridges <yournickname> >> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe >> smartBridges) >> Archives: http://198.63.203.6 > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the body type unsubscribe smartBridges) Archives: http://198.63.203.6 The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://198.63.203.6
