Thanks
Chris,
I’ll go
try this
Joe
East Texas
DSL
-----Original
Message-----
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]On Behalf Of phantam
Sent: Tuesday, June 24, 2003 2:14
PM
To: '[EMAIL PROTECTED]'
Subject: RE: [smartBridges] PPOE
Firmware.
Is the APPO's primary port set to
Ethernet? Is it on the same subnet as the server your trying to search for them
on?
If not please fix these 2 problems and you
should be able to see them.
Chris
-----Original Message-----
From: Joe Kelley [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, June 24, 2003 3:26 PM
To: [EMAIL PROTECTED]
Question
I just changed out my radios on a tower location to
smartBridges APPO's
We had tested everything from that location, every thing is
working fine,
I tried for the first time to look at the APPO's from my headend
and cannot
see the AP's
I am using a Trango backhaul to a tower about 3 miles away
My question is this , shouldn't I be able to look at my APPO's
across the
bridge from the Headend side
Thanks
Joe
East Texas DSL
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On
Behalf Of David Berndt
Sent: Tuesday, June 24, 2003 2:00 PM
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges] PPOE Firmware.
Im not an expert on the situaion but heres
how i see it
1. mikrotik 2.7 works with xp's PPPoE
client over a wired connection
perfectly (im using it right now)
2. put an smartbridge wireless system in between the mikrotik box
and the
xp box and it stops working
therefore it seems to me that it must be
the smartbridge units which are
not passing the pppoe data
on correctly. Even if switching from the xp client to something
else like
raspppoe patches the problem
it does not FIX the problem. Clearly the smartbridge units are
causing a
problem which needs to be fixed.
Dave
At 11:41 AM 24/06/2003 -0700, you wrote:
>The one built in with XP mostly. But I am assuming that
the one with
>98, 98se and ME are in the same boat. Ask the list about
PPPOE
>software, or search the archives, I know it has been mentioned
before.
>
>Scott
>
>-----Original Message-----
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED]]
On Behalf Of Pascal Losier
>Sent: Tuesday, June 24, 2003 11:16 AM
>To: [EMAIL PROTECTED]
>Subject: RE: [smartBridges] PPOE Firmware.
>
>
>Do you mean the built in PPPoe server in mikrotic,
>
>Or the built in PPPoe connection in XP. ??????
>
>I don't understand your answer.
>
>I know rev 2.6 of Mikrotik had issue but not 2.7
>
>APP firmware says no know issue.
>
>
>
>
>-----Original Message-----
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED]]
On Behalf Of Scott Damron
>Sent: Tuesday, June 24, 2003 3:06 PM
>To: [EMAIL PROTECTED]
>Subject: RE: [smartBridges] PPOE Firmware.
>
>
>The built in PPPoe does not work with Mikrotik, or Airbirdge.
>
>Scott
>
>-----Original Message-----
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED]]
On Behalf Of Pascal Losier
>Sent: Tuesday, June 24, 2003 10:49 AM
>To: [EMAIL PROTECTED]
>Subject: [smartBridges] PPOE Firmware.
>
>
>
>Hi,
>
>I have set up a PPPOE server on mikrotik, v.2.7,
>
>I can log in with a client under 95,98,2000,XP &
router.....
>
>However I'm on a wired Lan.
>
>If I go wireless, I cannot log. I cannot log using Airbridge
client or
>WB320. I did not try anything else. I will try it with APP set
up has
>client to see.
>
>
>My questions are ????
>
>What firmware I should use on my APP access point.
>
>What firmware I should use on my Airbridge indoor.
>
>What firmware I should use on my Airbridge oudoor.
>
>What firmware I should use on my APP set up has client.
>
>
>Could it be possible for smartbridge to have a software or
firmware
>which would enable me to authorize an AirBridge with PPPOE.
????.....
>Maybe it's a bad idea.
>
>
>The PART-15.ORG smartBridges Discussion List
>To Join: mailto:[EMAIL PROTECTED]
(in the body type subscribe
>smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in
>the body type unsubscribe smartBridges)
>Archives: http://198.63.203.6
>
>
>The PART-15.ORG smartBridges Discussion List
>To Join: mailto:[EMAIL PROTECTED]
(in the body type subscribe
>smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in
>the body type unsubscribe smartBridges)
>Archives: http://198.63.203.6
>
>
>
>
>The PART-15.ORG smartBridges Discussion List
>To Join: mailto:[EMAIL PROTECTED]
(in the body type subscribe
>smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in
>the body type unsubscribe smartBridges)
>Archives: http://198.63.203.6
>
>
>The PART-15.ORG smartBridges Discussion List
>To Join: mailto:[EMAIL PROTECTED]
(in the body type subscribe
>smartBridges <yournickname>
>To Remove: mailto:[EMAIL PROTECTED]
(in the body type unsubscribe
>smartBridges)
>Archives: http://198.63.203.6
The PART-15.ORG smartBridges Discussion
List
To Join: mailto:[EMAIL PROTECTED]
(in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED]
(in the body type unsubscribe
smartBridges)
Archives: http://198.63.203.6
The PART-15.ORG smartBridges Discussion
List
To Join: mailto:[EMAIL PROTECTED]
(in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED]
(in the body type unsubscribe smartBridges)
Archives: http://198.63.203.6
