Boot the boot. Kevin Summers KISTech Internet Services Inc. www.kistech.com
> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Patrick > Sent: Thursday, July 10, 2003 1:38 PM > To: [EMAIL PROTECTED] > Subject: Re: [smartBridges] Powershot > > > I also HATE the boot.... > ----- Original Message ----- > From: "Roger Howard" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Thursday, July 10, 2003 4:21 PM > Subject: Re: [smartBridges] Powershot > > > > Ok, I'm fine with that... eliminate the boot.. and spend the > extra 2c you > > spared on a better power socket... then we'll have the perfect > powershot. > > > > It looks a bit nicer and finished with a boot on it, but > functionality is > > more important. > > > > Thanks, > > Roger > > > > ----- Original Message ----- > > From: "Eric Calkins" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Thursday, July 10, 2003 3:11 PM > > Subject: Re: [smartBridges] Powershot > > > > > > > I agree, it does not need to be there. Pain in the butt! > > > > > > Eric :) > > > > > > > > > > > > > > > Dan Petermann wrote: > > > > > > > Get rid of it all together, I hate those things. I take > the scissors > on > > > > my leatherman and > > > > cut it off. > > > > > > > > Dan Petermann > > > > wyoming.com > > > > > > > > At 03:02 PM 7/10/2003 -0500, you wrote: > > > > > > > >> While we're talking about powershots, for the next version, can you > > > >> make the > > > >> boot on the RJ45 connector that goes into the PC/switch a > bit softer > > > >> plastic? It's sometimes next to impossible to squeeze the thing > enough > > to > > > >> unclip it. My thumb is still hurting from the last one I had to > > > >> unplug. It's > > > >> especially difficult because these are often plugged in in very > awkward > > > >> places. You almost need a pair of plyers to get them out! > > > >> > > > >> Thanks, > > > >> Roger > > > >> > > > >> The PART-15.ORG smartBridges Discussion List > > > >> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > > >> smartBridges <yournickname> > > > >> To Remove: mailto:[EMAIL PROTECTED] (in the body type > unsubscribe > > > >> smartBridges) > > > >> Archives: http://archives.part-15.org > > > > > > > > > > > > > > > > The PART-15.ORG smartBridges Discussion List > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > > > smartBridges <yournickname> > > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > > > smartBridges) > > > > Archives: http://archives.part-15.org > > > > > > > > > > The PART-15.ORG smartBridges Discussion List > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > smartBridges) > > > Archives: http://archives.part-15.org > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type > unsubscribe smartBridges) > Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
