Title: RE: [smartBridges] Here I come from ETSI land

I WISH

-----Original Message-----
From: Kevin Summers [mailto:[EMAIL PROTECTED]]
Sent: Saturday, July 12, 2003 5:05 PM
To: [EMAIL PROTECTED]


Are there any data sheets or any material to read about some
of the details that will be in Nexus?

Kevin Summers
KISTech Internet Services Inc.
www.kistech.com

> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Nish Park
> Sent: Saturday, July 12, 2003 11:06 AM
> To: [EMAIL PROTECTED]
> Subject: RE: [smartBridges] Here I come from ETSI land
>
>
> With the current radio the range can not be lowered below 11.5dB.
> For our new hardware platform Nexus due to be released in Q4 it will be
> possible to do this.
>
> Nish

>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]] On Behalf Of Leszek Olszewski
> Sent: Sunday, July 13, 2003 1:44 AM
> To: '[EMAIL PROTECTED]'
> Subject: [smartBridges] Here I come from ETSI land
>
> Hello,
>
> I come from ETSI land and as most of you know we have legal limits of
> +20dBm EIRP.
>
> The question is - is it possible to reduce Smartbridges radio TX power
> (SB
> in general, I believe radios used in your devices are equal) down to say
>
> +3dBm? By doing this I could use higher gain antena, stay within legal
> EIRP
> limit and achieve longer link.
>
> Now, I do know that there's dial-a-power which allows regulation down to
>
> 11.5dBm. I am also aware that SB units can be managed via generic Atmel
> SNMP configurator and there you can put hex values for each channel to
> manipulate TX power. These guys
> http://www.dcom.cz/docs/wlan/wen2021/vykon2021.htm claim they could
> drive
> similiar device down to -8dBm (!).
>
> Can someone please confirm or deny this and possibly provide some
> further
> explanation why or why not that is possible?
>
> I'll appreciate some in-depth technical answer, if possible.
>
> Regards,
> Leszek
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://archives.part-15.org 
>
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type
> unsubscribe smartBridges)
> Archives: http://archives.part-15.org 
The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org 

Reply via email to