Seeni I cant wait but please can you
request 1 feature be added for me even if it's a last minute things,
Just copy the code from the APPO code for
the Client Quality section into the AP just so that we can atleast monitor our
clients properly, I want to use some of these to do my low end sites but I need
this operation or else im screwed basically.
Chris
From: sB Tech Support
[mailto:[EMAIL PROTECTED]
Sent: Thursday, July 17, 2003 7:15
PM
To: [EMAIL PROTECTED]
Sully.
Lost association also related the heat issue which is fixed
now with new firmware. The new firmware will be posted very soon.
Seeni, SB support
-----Original Message-----
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree Network
Sent: Friday, July 18, 2003 4:10
AM
To: '[EMAIL PROTECTED]'
Subject: [smartBridges]
BACK-Online URGENT: Head-End APPO not receiving a thing!!
I cant believe
this. I unplugged it for 15 minutes and plugged it back in, and everyone
reassociated immediately. I had done SEVERAL power resets,
etc..etc....but only unplugging it for 15 minutes worked.
SPECIAL NOTE: It is
about 78 degrees here in Monterey, CA. This SHOULD NOT be a heat
problem!!
What the heck!!!!!!!!
sB....will the new
firmware fix this??
Sully
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Jeff Gojkovich
Sent: Thursday, July 17, 2003
12:18 PM
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges]
URGENT: Head-End APPO not receiving a thing!!
I would unplug it and let it cool off for about 20 min
and see if it will come back up then.
--
Jeff
>
> Check any and every connection between the APPO and the antenna.
> Look for loose connectors, or water, or a dead amp, etc..
>
> If all looks good it's probably the APPO.
>
> Kevin Summers
> KISTech Internet Services Inc.
> www.kistech.com
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of The Wirefree Network
> Sent: Thursday, July 17, 2003 12:06 PM
> To: [EMAIL PROTECTED]
> Subject: [smartBridges] URGENT: Head-End APPO not receiving a thing!!
> Importance: High
>
>
> My new head-end aPPo just went down. I have had it online for about 5
> days
> now with no problems. I am logged into it and looking at the statistics,
> it
> is receiving ZERO packets. It is constantly transmitting beacons.but is
> receiving NOTHING. I have reset it.factory defaulted it.turned off
> WEP.turned off authentication.etc.etc.NADA..no received packets at all.
>
> I have about 22 units that are normally associated to this head-end (one
> of
> which is a repeater with 20 more clients behind it). Everyone is down!!!
>
> Has the unit gone to crap or am I forgetting to check something key??
>
> Thanks all!
>
> Sully
>
>
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges
> To Remove: mailto:[EMAIL PROTECTED] (in the body type
unsubscribe
> smartBridges)
> Archives: http://archives.part-15.org
>
The PART-15.ORG smartBridges Discussion List To Join:
mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges To
Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org
