Mike and Sully. What FW are you running on the AP that the upgraded units
will not associate with? What was your pre-upgrade RSSI and LQ? What is the
length of the ESSID on the AP that the units will not associate with?

Mike, are there anyother differences between the APs that the upgraded units
will assoiate with and the APs they will not associate with?

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of The Wirefree Network
Sent: Friday, July 18, 2003 6:31 PM
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges] Anyone having issues with the new firmware?


I tried to upgrade one of 3 freezing units and it would not associate with
the AP.  This is the only AP within range of all 3 units, so I dont know
what to do at this point.

I had to downgrade back to old firmware to reassociate.

Sully

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Michael Saathoff
Sent: Friday, July 18, 2003 12:29 PM
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges] Anyone having issues with the new firmware?


Update,
I have 7 AP's running the same firmware.  For some reason upgrading the
firmware on the AirBriges kills their ability to associate with two of seven
AP's.  I can associate with any of the other five and all seems to be
working well.

Not sure why yet.

--Mike



-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Michael Saathoff
Sent: Friday, July 18, 2003 12:20 PM
To: [EMAIL PROTECTED]
Subject: RE: [smartBridges] Anyone having issues with the new firmware?


Sam,
It either works or it dosen't.....Sounds funny but, what I mean is that the
upgrade seems to resolve the heat issue.  Though I haven't had any real heat
the last couple days.  The bad side is that it seems to kill my ability to
associate with some of my AP's.

--Mike



-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Sam
Sent: Friday, July 18, 2003 12:09 PM
To: [EMAIL PROTECTED]
Subject: [smartBridges] Anyone having issues with the new firmware?


Has anyone installed the new firmware? I'm getting ready to try, but wanted
to check first to see what sort of luck others have had.

Thanks
Sam


The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the
body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the
body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the
body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the
body type unsubscribe smartBridges)
Archives: http://archives.part-15.org  

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org

Reply via email to