FYI this is just a basic hub with hand solder wires from the input to the output. Note that's is a bad idea but this is just like using our POE splitter with multiple power connectors in that there is no load control per port, vs a true 802.3af switch.
Sincerely, Tony Morella Demarc Technology Group, A Wireless Solution Provider Office: 908-996-7995 Cell: 908-246-9170 Fax: 908-847-0202 http://www.demarctech.com > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Martin Moreno > Sent: Sunday, July 20, 2003 12:13 AM > To: [EMAIL PROTECTED] > Subject: Re: [smartBridges] POE Hub/Swtich > > > Dennis are you looking for a particualr brand of switch that > will allow you to > do this? or just explaining what you will be doing? > > Here are a couple I did a search on yahoo and came back with > > http://www.netnimble.net/powhub.html > I also do believe http://www.baystack.com makes what you are > looking for as > well not sure about 3 com or cisco etc if they allow this to > pass through or not > > just some input for you > Martin > > Quoting Dennis Burgess <[EMAIL PROTECTED]>: > > > The only prob is that I have a tower that is going up that > is 100 foot > > from the nearest outlet. So. we are running cat5 inside > the house. > > But, we don't want to have to run 2-3 or 4 cats though the > conduit in > > the ground, we want to drop it into a switch or hub at the > bottom of > > the tower and then run up to the APPOs on top? > > > > SOOO. I need a hub that is powered by POE and will pass the POE to > > other devices! > > > > Dennis > > ----- Original Message ----- > > From: Ray > > To: [EMAIL PROTECTED] > > Sent: Saturday, July 19, 2003 10:51 PM > > Subject: Re: [smartBridges] POE Hub/Swtich > > > > > > Tony is a great guy with great products and any wireless > list that > > doesn't have his input is missing out! > > > > Ray > > > > > > ----- Original Message ----- > > From: phantam > > To: '[EMAIL PROTECTED]' > > Sent: Saturday, July 19, 2003 8:07 PM > > Subject: RE: [smartBridges] POE Hub/Swtich > > > > > > LOL Almost had me flip out I just talked to him a few > days ago he > > was supposed to do a etinc vs the new demark bwmgr writeup > but hasn't > > gotten back to me. > > > > > > > > Chris > > > > > > > > > > > ---------------------------------------------------------------------- > > ------ > > > > From: Ray [mailto:[EMAIL PROTECTED] > > Sent: Saturday, July 19, 2003 8:34 PM > > To: [EMAIL PROTECTED] > > > > > > > > Too many lists... I thought I was responding to a > different list. > > > > > > > > > > > > ----- Original Message ----- > > > > From: John Hokenson > > > > To: [EMAIL PROTECTED] > > > > Sent: Saturday, July 19, 2003 5:09 PM > > > > Subject: Re: [smartBridges] POE Hub/Swtich > > > > > > > > I saw Tony on here last night.... > > > > > > > > JH > > > > ----- Original Message ----- > > > > From: Ray > > > > To: [EMAIL PROTECTED] > > > > Sent: Saturday, July 19, 2003 3:51 PM > > > > Subject: Re: [smartBridges] POE Hub/Swtich > > > > > > > > Unfortunately, the owner of that site has been banned from > > this list (if I remember right) so we can't get info directly from > > him. > > > > > > > > Ray > > > > > > > > > > > > ----- Original Message ----- > > > > From: Dave Covert > > > > To: [EMAIL PROTECTED] > > > > Sent: Saturday, July 19, 2003 12:20 PM > > > > Subject: RE: [smartBridges] POE Hub/Swtich > > > > > > > > About the POE injector on that page... if you hooked a > > powered POE line into the 'output', do you get power and data out > > seperate on the two 'inputs'? > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] Behalf Of Ray > > Sent: Saturday, July 19, 2003 11:05 AM > > To: [EMAIL PROTECTED] > > Subject: Re: [smartBridges] POE Hub/Swtich > > > > > > http://www.demarctech.com/products/reliawave-poe/poe-main.html > > > > > > > > > > > > ----- Original Message ----- > > > > From: Dennis Burgess > > > > To: [EMAIL PROTECTED] > > > > Sent: Friday, July 18, 2003 9:18 PM > > > > Subject: Re: [smartBridges] POE Hub/Swtich > > > > > > > > I was just saying, it kinda sux to make. > Where can I buy one > > at? > > > > > > Dennis > > > > > > > > ----- Original Message ----- > > > > From: Dennis Burgess > > > > To: [EMAIL PROTECTED] > > > > Sent: Friday, July 18, 2003 11:07 PM > > > > Subject: Re: [smartBridges] POE Hub/Swtich > > > > > > > > ya, but.. that kinda sux. > > > > ----- Original Message ----- > > > > From: gav > > > > To: [EMAIL PROTECTED] > > > > Sent: Friday, July 18, 2003 9:58 PM > > > > Subject: Re: [smartBridges] POE Hub/Swtich > > > > > > > > WE build our own.... we take regular switches and > > make the appropiate jumpers... we have a switch that's > powered by POE > > and then it feeds POE on the ports too... > > > > > > > > Gino > > > > > > > > ----- Original Message ----- > > > > From: Dave Covert > > > > To: [EMAIL PROTECTED] > > > > Sent: Saturday, July 19, 2003 12:44 AM > > > > Subject: RE: [smartBridges] POE Hub/Swtich > > > > > > > > I was just about to ask a very simular > question... > > but instead of a hub that supplies POE, I need a POE powered hub... > > that is, a hub that is powered by POE coming in on one of > its sockets. > > Anything like that exist? > > > > > > > > Out of curiosity, what happens if you plug the > > 'hot' end of a POE line into a regular hub? Do the POE lines > > terminate? or pass thru? > > > > > > > > Dave > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] Behalf Of Dennis Burgess > > Sent: Friday, July 18, 2003 9:19 PM > > To: [EMAIL PROTECTED] > > Subject: [smartBridges] POE Hub/Swtich > > > > Whos is using a POE Hub/Swtich?? Where can I > > find one! > > > > > > > > Dennsi > > > > > > > > > > > > > > --- > > Outgoing mail is certified Virus Free. > > Checked by AVG anti-virus system > > (http://www.grisoft.com). > > Version: 6.0.500 / Virus Database: > 298 - Release > > Date: 7/11/2003 > > > > > Martin Moreno > Blazen Wireless > 909-907-4106 > www.blazenwireless.com > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type > subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
