Unfortunately the SB CPEs and APs don't show you the associated speed. This was done connecting to a Teletronics AP that does show your associated speed and signal strength. No matter what setting I used on the client end, if there was enough signal it always hooked up at 11Mbit.
Kevin Summers KISTech Internet Services Inc. www.kistech.com > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Peter Cartwright > Sent: Tuesday, July 22, 2003 11:59 AM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Basic Settings Rates? > > > I'd be interested if SB could confirm this one! > > > Loop Scorpio Ltd > providers of Ledbury Broadband and Highnam Broadband > www.ledburybroadband.co.uk > www.highnambroadband.co.uk > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Kevin Summers > Sent: 22 July 2003 19:42 > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Basic Settings Rates? > > > > I've noticed that whatever you check (and this happens with > all manufacturer's radios) the radio always connects at the > best possible speed. So even if your intention is to have them > only connect at 1Mbit if it has enough signal it will connect > at 11Mbit. > > Kevin Summers > KISTech Internet Services Inc. > www.kistech.com > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Jerry Carter > Sent: Tuesday, July 22, 2003 11:34 AM > To: [EMAIL PROTECTED] > Subject: [smartBridges] Basic Settings Rates? > > > OK stupid question of the day. In the app on the basic tab. Why would you > not just have the rates at 11mbps with auto fall back rate checked? If you > just want to limit the customer can you not at the airbridge to > only 1 meg? > I have my app's setup this way and wondered if there were any reason to > check all the boxes and auto fallback. > > Jerry > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type > unsubscribe smartBridges) > Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
