I also have the same problem with Commscope 5nF4 outdoor cable. Someone says belden is better. I contacted some distributors and they said its all the same but I know its not. The strands don't fit into the grooves easy at all. I heard some people were using CAT6 plugs with the Commscope cable. Its funny I have no problem fitting the commscope into the plug SB provides but problems fitting into belkin round plugs or any other manufacture.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Patrick Sent: Wednesday, July 23, 2003 4:58 PM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] Cat5 for outdoor installs The problem I have is that the cover on the wires is really thick and doesn't push up into the connectors well. I tried two different ones with the same results. Wonder if the Tyco ones have more space for the thicker wire... ----- Original Message ----- From: "David Ross Buckley" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, July 23, 2003 4:37 PM Subject: RE: [smartBridges] Cat5 for outdoor installs > Plug? Are you referring to the cable end, I've never heard it referred to as > a plug. > > -----Original Message----- > From: Lanham Rattan [mailto:[EMAIL PROTECTED] > Sent: Wednesday, July 23, 2003 3:14 PM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Cat5 for outdoor installs > > > I use this plug on the gel and the gel/shielded. I can't say it's any > different than any other plug as it's the only RJ-45 plug I purchase but I > don't have a crimping problem. > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] Behalf Of Laurence Laforga > > Sent: Wednesday, July 23, 2003 2:10 PM > > To: [EMAIL PROTECTED] > > Subject: RE: [smartBridges] Cat5 for outdoor installs > > > > > > Is that one gel-filled? I recall someone saying that the gel-filled is > > ideal for underground type of install and that just the UV rated ones > > are required and cheaper for outdoor installs on roofs and such. > > > > > I use the Tyco brand for CSC and don't have a problem with crimping. > > > > > > > -----Original Message----- > > > > From: [EMAIL PROTECTED] > > > > [mailto:[EMAIL PROTECTED] Behalf Of Patrick > > > > Sent: Wednesday, July 23, 2003 8:49 AM > > > > To: [EMAIL PROTECTED] > > > > Subject: Re: [smartBridges] Cat5 for outdoor installs > > > > > > > > > > > > I concur that it is a PITA to crimp! Anyone know if there are > > connectors > > > > that fit it better to make crimping easier? > > > > ----- Original Message ----- > > > > From: "Roger Hartley" <[EMAIL PROTECTED]> > > > > To: <[EMAIL PROTECTED]> > > > > Sent: Wednesday, July 23, 2003 10:11 AM > > > > Subject: Re: [smartBridges] Cat5 for outdoor installs > > > > > > > > > > > > > prefix: cwc > > > > > part # 5exho4p24bkrmohpv > > > > > > > > > > This is the gel-filled type. Seems to be very good quality, but > > a PITA > > > > > to crimp. > > > > > > > > > > David Ross Buckley wrote: > > > > > > > > > > > I recall some posts awhile back about recommended cat5 cable > > > > for outdoor > > > > > > installs. I believe someone even gave a part number from > > Graybar. If > > > > > > possible can we get that number again, it would be greatly > > > > appreciated. > > > > > > Thanks in advance. > > > > > > > > > > > > > > > The PART-15.ORG smartBridges Discussion List > > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > > > smartBridges <yournickname> > > > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type > > unsubscribe > > > > smartBridges) > > > > > Archives: http://archives.part-15.org > > > > > > > > The PART-15.ORG smartBridges Discussion List > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > > > smartBridges <yournickname> > > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type > > > > unsubscribe smartBridges) > > > > Archives: http://archives.part-15.org > > > The PART-15.ORG smartBridges Discussion List > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > smartBridges) > > > Archives: http://archives.part-15.org > > > > > > > > > > Laurence Laforga > > TIRGON Communications, LLC. > > dba Waipahu.Net Wireless Broadband > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type > > unsubscribe smartBridges) > > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
