Try another card. If that does not work, I dunno, if it does, bad card. Scott
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jerry Olney Sent: Wednesday, July 23, 2003 4:18 PM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] Orinoco Client Cards At 05:05 AM 07/24/2003 +0800, you wrote: >Does it associate to the aPPO, pls check at Client Info Tab. Is the WEP >key entered correctly? Our device accept hex input, what about Orinoco. >Use the conversion table to refer if necessary >http://www.smartbridges.com/new/support/faq_ab.php#55 . Try disable WEP >will be quick way to isolate this problem. > >Alex >sB Tech Support Okay, I disabled WEB, MAC authorization and everything else I could find and neither sees the other. The lights flash on the Orinoco card like it's trying to find something but doesn't. The Orinoco client monitor shows that it's scanning but it only seems to be scanning a couple of channels, none of which are 6 which is what the aPPO is on. It settles in at 4 so I tried setting the aPPO to 4, nothing... Jerry The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
