Thanks for the feedback. We will correct it. Besides this, any other issue encountered with this firmware?
Alex sB Tech Support -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ole Bj�rklund Sent: Sunday, July 27, 2003 11:33 PM To: '[EMAIL PROTECTED]' Subject: [smartBridges] APPO 1.4j.8 firmware RADIUS auth problem Hi! I'we upgraded 4 of our APPO units with the 1.4j.8 firmware and none of those units work with Radius Authentication anymore?? The settings of primary port and network settings are the same as it used to be before the upgrade, but after the upgrade I dont see any radius requests coming in from the units?? As a temporarily workaround I have set up the CPE's manuall in the access table! Best Regards Oleb ** This message does not contain any viruses - scanned by Elektron and Webconnect virusscanner ** The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
