OK, thanks Andrew. I'm going to wait until I get a spare unit to test here in the shop. I am suprised that it behaves so much differntly than the AB Total. Del
-----Original Message----- From: Andrew [mailto:[EMAIL PROTECTED] Sent: Tuesday, July 29, 2003 10:33 AM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] FW: DHCP through AirBridge Outdoor Del- Try going into "sitesurvey" in "Airbridge simple monitor" and entering in the "essid" and "bssid" into the fields manually for each unit and hit the "set values" button toward the bottom of the window and then try to reassociate your units. Later, Andrew P.S. I hope this answers your question ----- Original Message ----- From: "Del Thompson" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, July 28, 2003 1:19 PM Subject: [smartBridges] FW: DHCP through AirBridge Outdoor > > > > -----Original Message----- > > From: Del Thompson > > Sent: Monday, July 28, 2003 1:14 PM > > To: '[EMAIL PROTECTED]' > > Subject: DHCP through AirBridge Outdoor > > > > Hello all, > > I'm relatively new to this list so don't know if this problem has been > > discussed before. > > I have a network with about 13 of the AirBridge Totals in the field and we > > have them set to use DHCP for the radio and the PC's connected to them. > > (most have the latest firmware 0.01.07). The ABT's are working fine. > > > > I ran into a problem late last week with the AirBridge outdoor of which I > > have three. They have the latest firmware 0.01.07, and are set up exactly > > the same as the ABT's. The AirBridge outdoors will not get a DHCP address > > and neither will the Clients connected to them. > > We have double checked our DHCP server and everything looks correct, other > > radios on the same AP get their respective DHCP address. > > > > It acts like the AirBridge Outdoor will not accept a DHCP address or pass > > DHCP requests from the clients. I double checked the primary port for > > DHCP on the ABO is set for Wireless which is how we have all of the other > > working radios setup. > > > > Any ideas? > > Thank you, > > Del > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
