I had the same thing happen to me. The fastest way and the way I did it was replace the cisco 340. I do not know why it happens I can only say it does.
Jerry ----- Original Message ----- From: "Rick Meeks" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, August 01, 2003 5:27 PM Subject: [smartBridges] New FW doesn't fix much > I am new to the forum and I'm sure this has been discussed, but I'd be > grateful for any ideas. > > I am bench testing a pair of AirPoint Pro Outdoor units that were apparently > affected by the firmware/temp bug. Initially the units would disassociate > from all clients anytime a revision to the MAC authorization table was > saved. Powering down for about 7 minutes brought them back temporarily. > > I upgraded firmware to 1.4j.8 and was able to save table additions and > things looked great for about 2 hours. > > The setup is this: One AirPoint Pro configured as access poiint, Ethernet to > INET router, associated with one Cisco 340 PCMCIA client. > Second AirPoint Pro configured as wireless repeater, associated to first > AirPoint, with one client (Linksys WET11 bridge) associated. > > Running a continuous ping to the router, they work great for about an hour, > then everybody disassociates, first the linksys to wireless repeater > connection, then the wireless repeater to access point,, finally the cisco > 340 client. > > I have learned not to expect much from the Linksys boxes (about one in four > will not associate with anything), but the 340 getting kicked off really > bugs me. > > Recovery does not require a hard boot, a simplemonitor reset on the main > access point brings back the 340 and wireless repeater, resetting the > repeater brings back the Linksys box. > > Anybody got any ideas? > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
