Sure.

Why not just use an omni and an amp?  500mw amp and 8dB omni is 35dB.

marlon

----- Original Message ----- 
From: "Roger Hartley" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, August 03, 2003 10:01 AM
Subject: Re: [smartBridges] In Search of 36db Configuration for AirPoint Pro
Outdoors


> The Hypergain antennas on the site range from 180* 15dBi sector with 10*
> vertical beamwidth to 90* and 120* 20dBi with 6.5* vertical beamwidth.
> Seems as though that would take some mighty careful aiming. Would it
> work to put one of these high gain sectors aimed at just under the
> horizon for long shots and then have a lower gain aimed in the same
> direction but more downtilt for closer customers? Different channels, of
> course.
>
> Marlon Schafer (509-982-2181) wrote:
> > I can't get into the web site....
> >
> > I thought that the maxrad adjustable sector might be the hot ticket for
you.
> >
> > You can get 90* sectors with pretty high gain.17dB or so.  For a short
coax
> > run I count connectors etc. as 0dB.  If 2dB makes a difference on your
> > system, your in trouble anyway.
> >
> > Make sure not to get too high of a gain.  You don't want to end up with
a 2*
> > vertical pattern!
> >
> > marlon
> >
> > ----- Original Message ----- 
> > From: "Greg Sims" <[EMAIL PROTECTED]>
> > To: <[EMAIL PROTECTED]>
> > Sent: Sunday, August 03, 2003 7:55 AM
> > Subject: RE: [smartBridges] In Search of 36db Configuration for AirPoint
Pro
> > Outdoors
> >
> >
> >
> >>Thanks for the feedback Nish.  I really didn't make it clear in my
> >
> > original
> >
> >>post but I need to build an AP that covers at least 90 degrees and as
much
> >>as 180 degrees.  This implies that I need a sector antenna of some sort
> >>instead of a directional parabolic.
> >>
> >>
> >>> -----Original Message-----
> >>>From: [EMAIL PROTECTED]
> >>>[mailto:[EMAIL PROTECTED]
> >>>Sent: Saturday, August 02, 2003 11:42 PM
> >>>To: [EMAIL PROTECTED]
> >>>Subject: RE: [smartBridges] In Search of 36db Configuration for
> >>>AirPoint Pro Outdoors
> >>>
> >>>Why not consider 19 or 24db parabolic? They are certified. You can turn
> >>>down the output power a little bit with Dial-aPower.
> >>><http://www.smartbridges.com/new/products/antenna.php>
> >>>
> >>>Nish
> >>>
> >>>
> >>>-----Original Message-----
> >>>From: [EMAIL PROTECTED]
> >>>[mailto:[EMAIL PROTECTED] On Behalf Of Greg Sims
> >>>Sent: Sunday, August 03, 2003 2:10 PM
> >>>To: '[EMAIL PROTECTED]'
> >>>Subject: [smartBridges] In Search of 36db Configuration for AirPoint
Pro
> >>>Outdoors
> >>>
> >>>I'd like to be able to deploy a maximum legal power point to
multi-point
> >>>AP using APPO.  I believe the FCC will allow 36db ERP in this
> >>>configuration. The APPO generates 17.5 db at the antenna connection.
> >
> > The
> >
> >>>maximum approved sector antenna is 16.5 db from PacWireless.  This
gives
> >>>us 34 db but we need to subtract perhaps 2 db for connectors, coax and
> >
> > the
> >
> >>>like giving us 32 db.
> >>>
> >>>It looks like we could use a 20 db antenna to really make an APPO sing.
> >>>Are there other antenna's that are not on the 'certified' list that we
> >>>could legally use?  Does anyone have suggestions for specific antennas?
> >>>
> >>>Thanks, Greg

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org  

Reply via email to