RE: [smartBridges] AirPoint-Pro Outdoor

[sBTech]

Yes, the “+” polarity in the outside and “-“polarity at the centre.             Seeni, SB support   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rob Cleminson Sent: Wednesday, August 06, 2003 6:26 AM To: '[EMAIL PROTECTED]' Subject: RE: [smartBridges] AirPoint-Pro Outdoor   Thanks for that – I neally bought the wrong one tonight. Most UK adapters have the positive in the centre – it was only on closer inspection of the Powershot that I noticed Positive on the outside – I’ll have to keep looking tomorrow.   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of sBTech Sent: 05 August 2003 21:33 To: [EMAIL PROTECTED] Subject: RE: [smartBridges] AirPoint-Pro Outdoor   Hi Rob Cleminson,   An 18 V DC plug is an ideal and sufficient plug however you have to make sure that the polarity of the plug should as specified in the website. http://www.smartbridges.com/new/products/ps.php   Few customers are using Motorola Canopy Powershot which is 24V and it is same pin as sB. Also you can use the following powersupply, however you need to change the Pin polarity as stated in the specification. Brand: Mouser Model: 552-PSA-31U-180 [EMAIL PROTECTED]   To help you procure the correct power supply adapter, the specification of the power adapter is :- Output Voltage Range Regulated between 15V to 18V (max) Current Ratings 1 Ampere Type of Plug Barrel Type Plug Polarity outer body = +ve, center = -ve Diameter of plug Inner Diameter of the plug = 2.5mm Outer Diameter of the plug = 5.5mm Length of the plug 10mm or more   Thank you   Seeni, SB support -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rob Cleminson Sent: Wednesday, August 06, 2003 12:57 AM To: '[EMAIL PROTECTED]' Subject: [smartBridges] AirPoint-Pro Outdoor   Hi,   I just purchased my first Airpoint Pro Outdoor – Powered it up fine on my desk.   Just got down from installing on my tower – I have 100Metres of CAT5 and now no power is arriving at the unit?   Is this because I am using the standard 12V AC Adapter and because of the extra cable length now need 15V. There is a note in the booklet suggesting that this is best but I am not sure if it is a MUST   Any advice?   Regards   Rob Cleminson

image001.gif
Description: Binary data