Hi Patti, Thank you for your test setup and we would like to receive a feedback on the test results. We have been sent to many customers & WISP and the results were positive and successful. Also we would like to listen from you.
Thank you Seeni, SB support -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Patti Jones Sent: Friday, August 08, 2003 2:31 AM To: '[EMAIL PROTECTED]' Subject: Re: [smartBridges] firmware fix I have small test LAN setup right now. I am using an Air Point in AP mode for the connection. I have upgraded 3 radios. 2 with prior problems and 1 without. They have all been running about 2 hours. I will let them run for a few days and see what happens and let you know. Patti ----- Original Message ----- From: "sBTech" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, August 07, 2003 12:51 PM Subject: RE: [smartBridges] firmware fix > Hi Patti, > > If you are experiencing any disassociation issues with your airBridge, > you can go ahead and upgrade the new firmware and this has been tested > with many customer sites. > > We are working on the new simpleMonitor 1.61(0.01.07 firmware included) > for the airBridge which will accept the password with different > characters. We have a beta version and we have not officially released > yet. But if you want, you can try it out with any disassociation unit > (with different password characters) and give us your feedback. > > Thank you > > Seeni, SB support > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Patti Jones > Sent: Friday, August 08, 2003 12:55 AM > To: '[EMAIL PROTECTED]' > Subject: [smartBridges] firmware fix > Importance: High > > I have about 20 radios here and several in the field. I know there is a > firmware upgrade to fix the disassociation problem. My question is can > I > just load it on all radios here. I have taken several @#$ chewing over > our > current problems and don't want any others. I just want the radios to > work > the first time and stay working. So I can just load the firmware fix > and > all will be well? > > Patti > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
