I have just found a 16V DC 200mA Adapter at home - will this do the job? -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kevin Summers Sent: 05 August 2003 18:30 To: [EMAIL PROTECTED] Subject: RE: [smartBridges] Ethernet port problem
Yes, for powering a unit on that length of cable you'll definitely need the 18V power supply. Kevin Summers KISTech Internet Services Inc. www.kistech.com <http://www.kistech.com/> > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Rob Cleminson > Sent: Tuesday, August 05, 2003 10:28 AM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Ethernet port problem > > > I checked all cables - checked all crimped ends - everything worked on > the ground - I just installed the unit up my tower with 100Metre of > Cat5, plugged in the powershot and nothing - I'll try the 18V supply. > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Tom Haynes > Sent: 05 August 2003 18:15 > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Ethernet port problem > > No, it sounds like a loose connection at the computer, powerShot or air > bridge. Try using a different powerShot and cables. > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] > On Behalf Of Matt Grommes (SpinnNet System Admin) > Sent: Tuesday, August 05, 2003 11:56 AM > To: [EMAIL PROTECTED] > Subject: [smartBridges] Ethernet port problem > > > One of my techs was experiencing a weird problem with an AirBridge > Outdoor the other day. He hooked it up and it came up just fine but then > > when he went back into the SimpleMonitor to change the password it > started losing association and wouldn't come back up. When he brought up > > the screen to search for APs and hit Refresh, the Ethernet connection > from his laptop to the ABO died (no light on ABO, windows complaining > that the connection was lost) and he had to reboot the ABO to get it to > come back up. We haven't had any problems like the heat issue others > experienced so I'm not sure if this is that problem or not. He's going > to try the new firmware on the unit today but does this sound like that > issue? > > > -- > -- Matt Grommes -- > -- System Admin -- > -- SpinnNet -- > -- 505.938.7746 -- > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type > unsubscribe smartBridges) > Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
