Can you ping both IPs at the same time? It should not. Probably this is Mac caching problem. The device at all time has only one effective IP address. Check your PC arp table or try to use arp -d to refresh the arp enrty in your PC. Or if you allow the arp entry to age out, re launch the simpleMonitor and you will only see one IP address.
Alex sB Tech Support � � -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Martin Moreno Sent: Sunday, August 10, 2003 2:04 AM To: '[EMAIL PROTECTED]' Subject: [smartBridges] Using simply deploy possible problem. Okay 1st time using this software now that I had a few min. 1. I made and saved an ABO file just for this one customer as a test I made it so that default it should show up as his private ip of 10.0.0.xxx with the correct SSID instead of any etc if he should ever need to hit the reset button. 2. I flashed this into the radio but when I do a search for the radio it comes up with the default IP of 192.168.0.22?? The password that I burned it worked with that ip. 3. I thought HMM okay I logged off and low and behold I could ALSO log in with 10.0.0.xxx?? does this mean BOTH ips are burned into the chip?? 4. This brings up a question if by doing this it gives two ips and I do this to more radios will the 192.168.0.22 cause IP confilicts if all the other radios still have that same IP in there somwhere??? 5. Now without using simply depoly say I use simple monitor and I change the IP it shows the IP I programed in the window when I do a search. 10.0.0.xxx etc on other radios now I have never tested and I will later today but I thought maybe the 192.168.0.22 will still work on these as well?? Over all I see this as a problem of some sort that can only lead to IP conflicts... Please let me know what to test or is this normal and if so how can it or can it not cause issues??? Thanks Martin Moreno Blazen Wireless www.blazenwireless.com The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
