Okay guys here is a question I know SB says they
can have up to 128 clients associated to the APPO. I have aprox 22 on each one
and they are totally crapping out by that mean I get 4-5 users on downloading
at any given time and I swear to you pings just go to hell as high as 200-300
and lows about 30ms. I have tried EVERYTHING RTS CTS different channels WEP no
WEP anything and everything and it has got me by the balls and I am tired of
clients calling me complaining it is slow. It used to be awesome with 4-5
users total on it and even 10 users but after that its just gone down
hill.
Any suggestion would GREATLY be
appreciated.
two APPO's each connected to a 500mw Amp 50 ft of
coax LMR 400 and then to a 13DB 90* pac wireless ant one facing north and one
facing south both on chan 3 I know I know you will say interference from each
other I tried separating and it made no difference it actually got worse I
even had one appo in client bridge mode to check interference and I saw
nothing form the APPO right next to it and very few other Access points out in
the field. Most were at rssi 20 maybe 30% and link 20%.
PLEASE PLEASE PLEASE help me with any ideas I am
all out I have worked on this all week I have a remote pop that is fed by the
main two APPO's and the two customers on that radio can ping the remote appo
all day long with less then 5 ms yet when you try and ping the main appos the
pings are all over the place..
Oh yea most all signals at eh APPO's from the
client show (not sure how accurate) 80 -100 RSSI some just under 80% and link
about the same so I don't know if this could hamper it I have tried with a
couple clients setting the APPO and ABO to autofallback speeds and that seemed
to help for a couple people that were far out about 4-5 miles people up close
seem to be fine..
13-19db ants on each install
HELPPPPPPPPPPPPPPPPPPP
Martin
