If your point is how low can we connect at....then I will jump back and slap myself for you. Cause I have never connected at below 40% RSSI (don't know the dbm value).
Sully -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of The Wirefree Network Sent: Wednesday, August 20, 2003 2:17 PM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] APP/AB Specs... All my old stuff is working perfectly. And all my indoor airPoints are also working fine (new and old). I have clients ranging from 30 ft to 2 miles out and they are at an average of 92% RSSI and LQ. Even my new CRAPPY equipment gets those same RSSI and LQ...but they just tend to die about 5 times a week. No big deal. Can you hear my sarcastic tone?? Anyway...guess what I am saying is...you are doing something wrong. To further clarify, you or some other environmental issue is doing something wrong: 1. Antenna placement 2. Interference 3. Channel usage 4. Bad crimps 5. Bad cable 6. Bad NIC The list goes on.... Sully P.S. You are starting to sound like a competitor who is purposely SPAMMING this forum to damage sB's already shaky reputation. Let them RECALL this bad shipment and get us all back to the GREAT stuff we had before. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Shawn Mitchell Sent: Wednesday, August 20, 2003 2:05 PM To: smartBridges Subject: [smartBridges] APP/AB Specs... Receive Sensitivity -92dBm at 1Mbps / -83dBm at 11 Mbps Has anyone ever gotten this stuff to talk at anything less than -67? I've never been able to get it to talk at less than that, well, it'll see it, but my LQ is 10% Range Up to 34 km (21miles) Would be nice if I could get the ones that's just a few thousand feet away to work 95% of the time. Power Supply 12 V DC External Adapter provided.(100 V ~ 264 V / 50 ~60 Hz AC IN 12V DC OUT) Input: 90 to 260V AC, 50 / 60Hz, output: 12V DC, 1A 12 to 50V DC 12 to 50 volts DC? I thought SB said don't ever put anything more than 20/24 volts into them? btw SB.. you have the airPoint Total users manual in the airPoint Pro's place on FCC's site... The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
