Is the other company using any Teletronics amps? I have had problems with the Teletronics amps especially when combined with Linksys. The Linksys have some out of band and the Teletronics amps take that and amplify it. Even more specifically I have had Teletronics amps on channel 1 make channel 11 completely unusable. Email me offline if you want to talk more about amps and agc. Just a thought.
----- Original Message ----- From: "Dave Covert" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, August 20, 2003 10:53 PM Subject: [smartBridges] Playing together nicely > > Man, this stuff just doesn't play well with others does it? > > I just spent the evening risking West Nile virus exposure in the middle of a > marina with my laptop hooked up to an aBO trying to get more than 200K back > to my tower .7 miles away. The marina is infested with an incumbent WISP on > ch.1 using Linksys equipment and an omni (to cover 180* of marina, duh). > During the middle of the day, with the marina empty of ch.1 users, my client > on ch.11 gets well over 2Mbps. As more of the ch.1 users start to arrive > home and use the ch.1 system, my user on ch.11 sees a slowdown as well. > > My client is using an 18bdi Maxrad panel to talk to my 16dbi sector less > than a mile away. I know the 18dbi panel is overkill signal-wise, but my POP > is in the same general direction as the ch.1 POP and I am using the 18dbi > more for the confined beam angle than for the overall gain. > > I guess this is more of a rant than anything else... I just don't get how > these devices (11b in general, not sB in particular) have so poor rejection > as to allow ch.1 traffic to bleed over into ch.11 traffic. Anyone know a > good super-narrow bandpass filter design? I would love to have an inline > channel filter I could put on the antenna connector to knock down the > out-of-channel energy another 25db or so. > > Guess I'll go turn my antennas sideways and see if that helps... grumble > grumble... > > Dave > Home Wireless > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
