Has anyone had ABO
MAC# 00-30-1A-01-E2-27 before? I got it from E-comm a few weeks ago for an
install. Instead of testing it in the office like I normally do I had
a brain fart and decided to go ahead and install it. I just got back from
trying to configure it and I cannot get into the bridge. I have my IP
set to 192.168.0.55 / 255.255.255.0 - no gateway and no firewall.
I have done a hard
reset and let it reset 6 times in a row. I have manually entered the
MAC in my arp table with the IP of 192.168.0.22/255.255.255.0 and I cannot ping
it. The only thing I can think of is that I am using the cable
form one of the old units that came with outdoor cat5. I had tried to use
this cable before and it didn't work so Monday I am going to replace it. The
only thing to dispute my own troubleshooting is that all of the lights are on
the airbridge and my laptop shows a connected network. I will let
everyone know what I find on Monday.
As a side note to
listening to everything going on lately I am still planning a large network
upgrade this fall. I should be able to cover every town in my
county. I am still planning on using SB equipment as of today.
While on the one hand I can say that almost all of the issues I have faced
have been my fault, there are still some issues with the equipment. I
would like to see more input from SB about the issues that we are seeing,
especially those issues that have been occurring for many months. If not
for the dedication of a few individuals on this listserv, the heat issue would
not have been solved in such a timely manner and I thank those of you who took
the time to figure that out.
Thanks,
Scott Wells MCSE CCNA
President, Wells IT
Services
254-729-2207
[EMAIL PROTECTED]
