Yes it is
----- Original Message ----- 
From: "Jason Duncan" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, August 25, 2003 3:38 PM
Subject: Re: [smartBridges] ABO disassociation problems


is the default 2346 can't remember?

At 03:19 PM 8/25/2003 -0700, you wrote:
>try putting fragmentation and RTS CTS back to default it happened to me
that
>the radios it could see them but says I had the wrong password once I did a
>bulk upload to all radios which it still let me do for some reason and set
>them all to default it let me back in just fine?
>
>
>----- Original Message -----
>From: "Jason Duncan" <[EMAIL PROTECTED]>
>To: <[EMAIL PROTECTED]>
>Sent: Monday, August 25, 2003 3:15 PM
>Subject: Re: [smartBridges] ABO disassociation problems
>
>
>I'm trying it right now.  I had someone reboot the radios and I noticed
>that I could get into 4 of the radios with sm but the rest I could not the
>difference in the radios is the 4 I could get into have the new
>weatherproof cat 5 dongle and the ones I could not get into have the old
>50' cable attached.  Weird!
>
>
>
>At 02:52 PM 8/25/2003 -0700, you wrote:
> >Out of curiosity try raising the fragmentation back to default of 2346
and
> >see if it lets you back in!
> >
> >----- Original Message -----
> >From: "Jason Duncan" <[EMAIL PROTECTED]>
> >To: <[EMAIL PROTECTED]>
> >Sent: Monday, August 25, 2003 1:59 PM
> >Subject: [smartBridges] ABO disassociation problems
> >
> >
> >I have a small apt complex with 10 ABO's on the roof of 10 buildings all
> >running the latest firmware plugged into a dsl system at the base of each
> >building. The ABO's all point back to an APP running the latest fw. After
> >doing the latest fw upgrade I also lowered the rts/cts and fragmentation
> >down to 1500 on all radios. I am now getting disassociations from all of
> >the radios and cannot get in with simple monitor. I have to physically
> >reboot the radios to get them to come back up.
> >
> >Any ideas here will moving the rts/cts back up to default help?? I was
not
> >having near this many problems until after the fw upgrade and the
changing
> >of the thresholds.
> >Thanks
> >
> >
> >Jason Duncan
> >Trynetics LLC
> >480-964-6980
> >
> >The PART-15.ORG smartBridges Discussion List
> >To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> >smartBridges <yournickname>
> >To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> >smartBridges)
> >Archives: http://archives.part-15.org
> >
> >
> >The PART-15.ORG smartBridges Discussion List
> >To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> >smartBridges <yournickname>
> >To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> >smartBridges)
> >Archives: http://archives.part-15.org
>
>Jason Duncan
>Trynetics LLC
>480-964-6980
>
>The PART-15.ORG smartBridges Discussion List
>To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
>smartBridges <yournickname>
>To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
>smartBridges)
>Archives: http://archives.part-15.org
>
>
>The PART-15.ORG smartBridges Discussion List
>To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
>smartBridges <yournickname>
>To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
>smartBridges)
>Archives: http://archives.part-15.org

Jason Duncan
Trynetics LLC
480-964-6980

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org


The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org  

Reply via email to