Re: [smartBridges] Remote Power Rebooters

[Don Castella]

Title: Message

I see the following behavior constantly in a Cisco BR340 AP log from an aBT running the latest firmware:   8/26 8:16:05   NEWEST 8/26 8:08:54 I Node 00301a0aae63 802.11  re-connected 8/26 8:08:52 S Console connection attempt from 192.168.000.125 00301a0aae63 8/26 8:05:43 I Node 00301a0aae63 802.11  re-connected 8/26 8:05:41 S Console connection attempt from 192.168.000.125 00301a0aae63 8/26 7:59:25 I Node 00301a0aae63 802.11  re-connected 8/26 7:59:22 S Console connection attempt from 192.168.000.125 00301a0aae63 8/26 7:53:42 I Node 00301a0aae63 802.11  re-connected 8/26 7:53:39 S Console connection attempt from 192.168.000.125 00301a0aae63 I assume the console connection attempts are SNMP boroadcasts, but I wonder why the unit keeps re-connecting. The customer indicates that performance is a little flaky at times. ----- Original Message ----- From: Seeni Mohamed To: [EMAIL PROTECTED] Sent: Monday, August 25, 2003 3:07 PM Subject: RE: [smartBridges] Remote Power Rebooters We have already implemented in our new firmware release 0.01.07 which auto sense the AP every 6 minutes interval. Before the above firmware release, we have developed our own software utility to reset the device in case of no traffic pass thru for a certain interval of time. We have tested this software in our in-house as well as the few customer sites, considerably we found better improvements in the network. If you are already using a new firmware on the aB, there is no need of this software.   Seeni, SB support