Kevin im not using APPO's from smartbridges im using proxim we don't have these issues with their devices that i see all of you having,,,,we only use the airbridge to connect clients to our proxim aps so we have something better than a crappy Linksys Or Dlink cards to use,,,,but the bridge is killing bandwidth shaping and if we need a bridge to use to create a microwave link from a remote site that has another ap it must pass the Macs from the clients so nomadix can assign DHCP which currently will not work with a bridge... ----- Original Message ----- From: "Kevin Summers" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, August 26, 2003 11:06 PM Subject: RE: [smartBridges] A Real Bridge
> > So there was just a small batch of chips that had the > timing issue? That's cool. > > Kevin Summers > KISTech Internet Services Inc. > www.kistech.com > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] Behalf Of sB Tech Support > > Sent: Tuesday, August 26, 2003 10:58 PM > > To: [EMAIL PROTECTED] > > Subject: RE: [smartBridges] A Real Bridge > > > > > > New units with the new chip will still work with the old & new firmware. > > > > Alex > > sB Tech Support > > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Kevin Summers > > Sent: Wednesday, August 27, 2003 1:15 PM > > To: '[EMAIL PROTECTED]' > > Subject: RE: [smartBridges] A Real Bridge > > > > > > The older version of the firmware for the AirBridge (0.09.10) > > was a transparent bridge that did what you want. By downgrading > > to that version you lose the ability to remotely manage the radio, > > which is why they changed the bridge function to not be transparent. > > They couldn't make it transparent and still allow you to connect > > to it remotely. Firmware 0.01.04 and 0.01.07 are the versions that > > take away the transparency. 0.01.07 fixes the problem with the > > firmware timing of the new chips, so I would suspect that 0.09.10 > > wont work well with the new chips. > > > > That's actually a good question to ask SB support. > > > > Are all the chips now with the new spec that requires that firmware > > fix, or did they fix the chips and go back to the original spec? In > > other words will 0.09.10 work on a new radio? > > > > Kevin Summers > > KISTech Internet Services Inc. > > www.kistech.com > > > > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED] > > > Sent: Tuesday, August 26, 2003 9:47 PM > > > To: [EMAIL PROTECTED] > > > Subject: Re: [smartBridges] A Real Bridge > > > > > > > > > We bought outdoor and indoor airbridges all of the documentation > > > states its > > > a bridge but a true bridge does not alter the information at all it > > just > > > bridges it across....we have a Nomadix USG Gateway that controlls > > > bandwidth > > > and they are telling us the bridge is using a DHCP relay request > > > instead of > > > passthru......its not going to fly for our wireless use unless this > > can be > > > resolved. > > > ----- Original Message ----- > > > From: "Jerry Olney" <[EMAIL PROTECTED]> > > > To: <[EMAIL PROTECTED]> > > > Sent: Tuesday, August 26, 2003 9:33 PM > > > Subject: Re: [smartBridges] A Real Bridge > > > > > > > > > > At 09:21 PM 08/26/2003 -0700, you wrote: > > > > >Do any of you know how to make the airbridge work like a real > > > bridge? If > > > > >this device is a true bridge then it should not be masking the MAC > > > address > > > > >of the client behind it, with its own MAC address we have > > > spent many days > > > > >testing 20 of these SB2100's and so far they all do the same thing > > they > > > > >act more like a router masking the client behind the > > device...anyone > > > help? > > > > > > > > I believe only the AirPoint Pro in client bridge mode does > > > that... I was > > > > rather surprised also when I found out the AirBridge products > > behaved as > > > > you are describing. > > > > > > > > Jerry > > > > > > > > > > > > ANNOUNCEMENT > > > > WISPCON IV - Can You Ping Me Now? Good! > > > > October 27-29, 2003 - Dallas Texas > > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > > > > > WISP 101 Boot Camp > > > > September 29-October 3, 2003 - Chicago, Illinois > > > > http://www.part-15.org/train/wisp/101.html > > > > > > > > The PART-15.ORG smartBridges Discussion List > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > > smartBridges <yournickname> > > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > > smartBridges) > > > > Archives: http://archives.part-15.org > > > > > > > > > > > > > > > > > ANNOUNCEMENT > > > WISPCON IV - Can You Ping Me Now? Good! > > > October 27-29, 2003 - Dallas Texas > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > > > WISP 101 Boot Camp > > > September 29-October 3, 2003 - Chicago, Illinois > > > http://www.part-15.org/train/wisp/101.html > > > > > > The PART-15.ORG smartBridges Discussion List > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > > smartBridges <yournickname> > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type > > > unsubscribe smartBridges) > > > Archives: http://archives.part-15.org > > > > ANNOUNCEMENT > > WISPCON IV - Can You Ping Me Now? Good! > > October 27-29, 2003 - Dallas Texas > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > WISP 101 Boot Camp > > September 29-October 3, 2003 - Chicago, Illinois > > http://www.part-15.org/train/wisp/101.html > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > smartBridges) > > Archives: http://archives.part-15.org > > > > ANNOUNCEMENT > > WISPCON IV - Can You Ping Me Now? Good! > > October 27-29, 2003 - Dallas Texas > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > WISP 101 Boot Camp > > September 29-October 3, 2003 - Chicago, Illinois > > http://www.part-15.org/train/wisp/101.html > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type > > unsubscribe smartBridges) > > Archives: http://archives.part-15.org > ANNOUNCEMENT > WISPCON IV - Can You Ping Me Now? Good! > October 27-29, 2003 - Dallas Texas > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > WISP 101 Boot Camp > September 29-October 3, 2003 - Chicago, Illinois > http://www.part-15.org/train/wisp/101.html > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > > ANNOUNCEMENT WISPCON IV - Can You Ping Me Now? Good! October 27-29, 2003 - Dallas Texas http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm WISP 101 Boot Camp September 29-October 3, 2003 - Chicago, Illinois http://www.part-15.org/train/wisp/101.html The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
