I have a network monitoring server set up to monitor the bandwidth of the radios. In addition I have it regularly ping all radios in the network. I have not had a TR-CPE go down due to this issue since I began this practice at the end of July. My customers had to reboot at least once a day before this. All it took was a couple hours of inactivity to put them to sleep. Mike
Quoting Mickey <[EMAIL PROTECTED]>: > Thanks for the reply - does something like a cpe re-boot get the radios > talking again? > > Mickey > > ----- Original Message ----- > From: "Michael Saathoff" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Thursday, September 04, 2003 1:01 PM > Subject: RE: [smartBridges] SB/Tranzeo > > > > I've been trying to use Tranzeo TR-CPE with SB AP's. The TR-CPE's lock > up > > consistently. I've been told by Tranzeo that it's a SB issue with the > > following explanation: > > > > > > The issue appears to be in the Sleep Mode of the AP, or rather the lack > > of a > > sleep mode handling routine. Prism and Agere chipsets send wakeup > > frames to > > clients, and Atmels do not unless the firmware has code added. The > > TR-CPE > > has been told that it is disassociated, but the SB thinks it is still > > associated. THe TR-CPE sends reassociation beacons, which the SB > > ignores > > because it thinks the radio is still associated. > > > > I SB hasn't made any comment other than "Were looking into it" and that > was > > on 8-27. > > > > Good luck, > > > > Mike > > > > > > > > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] Behalf Of Mickey > > Sent: Thursday, September 04, 2003 10:27 AM > > To: [EMAIL PROTECTED] > > Subject: [smartBridges] SB/Tranzeo > > > > > > Anyone using Tranzeo and SB together? do they play well together? do they > > (Tranzeo) work well ingeneral? > > > > Thanks, > > Mickey > > > > ----------ANNOUNCEMENT---------- > > Don't forget to register for WISPCON IV > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > smartBridges) > > Archives: http://archives.part-15.org > > > > ----------ANNOUNCEMENT---------- > > Don't forget to register for WISPCON IV > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > > Archives: http://archives.part-15.org > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges > <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
