We're still waiting for Verizon to get the circuit installed. It was a comedy of errors that turned into a real nightmare.
The customer is moving their corporate office into this building and all of their remote offices around the country connect into them for data. They were scheduled for a Sept. 2nd install but Verizon installed the circuit at East Main St. instead of West. So now we're in a holding pattern until they get the circuit re-engineered and put out to the right address. In the mean time the customer is P O because their connection at the old office was scheduled to cut off this weekend and we're not ready. As soon as they tell me the circuit is live I'll be testing that configuration though. Thanks for the help. I'll let you know what happens. Kevin Summers KISTech Internet Services Inc. www.kistech.com > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Coy Wadsworth > Sent: Monday, September 08, 2003 6:57 AM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] OT: Cisco help. > > > Kevin, > Were you able to make any head way on your cisco routers? I work with > them everyday and you should be fine with the bridge irb stuff. If you > are still having problems let me know, I'm willing to help you out as > well. > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Kevin Summers > Sent: Sunday, September 07, 2003 10:56 AM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] OT: Cisco help. > > > Mostly time and money. > > Kevin Summers > KISTech Internet Services Inc. > www.kistech.com > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] Behalf Of Eje Gustafsson > > Sent: Saturday, September 06, 2003 1:57 PM > > To: Kevin Summers > > Subject: Re: [smartBridges] OT: Cisco help. > > > > > > Just curious why are you not doing pppoe from the 1601 ? > > If memory serves me right there IOS for 1601 that support pppoe. > > > > Best regards, > > Eje Gustafsson mailto:[EMAIL PROTECTED] > > The Family Entertainment Network http://www.fament.com > > Phone : 620-231-7777 Fax : 620-231-4066 > > - Your Full Time Professionals - > > -- > > > > KS> Yes, I believe that is what I'm looking for. I'll let > > KS> you know if it works when they turn up the circuit on > > KS> Monday. > > > > KS> Basically I've got, > > > > KS> MikroTik Router (PPPoE Server) > > KS> 192.168.254.1 > > KS> | > > KS> | > > KS> Cisco 2611 > > KS> | > > KS> | > > KS> (frame-relay T1) > > KS> | > > KS> | > > KS> Cisco 1602 > > KS> | > > KS> | > > KS> Customer (PPPoE Login) > > > > KS> I just need their PPPoE traffic to be able to bridge across > > KS> to the MikroTik. > > > > KS> Kevin Summers > > KS> KISTech Internet Services Inc. > > KS> www.kistech.com > > > > > > > > >> -----Original Message----- > > >> From: [EMAIL PROTECTED] > > >> [mailto:[EMAIL PROTECTED] Behalf Of Rob Genovesi > > >> Sent: Saturday, September 06, 2003 10:30 AM > > >> To: [EMAIL PROTECTED] > > >> Subject: RE: [smartBridges] OT: Cisco help. > > >> > > >> > > >> Kevin, > > >> > > >> I think this might be what your looking for : > > >> > > >> # 2611 > > >> ------------------------------------------- > > >> ! turn on integrated routing/bridging > > >> bridge irb > > >> > > >> interface Ethernet0/1 > > >> no ip address > > >> bridge-group 1 > > >> ! > > >> interface Serial 0/0 > > >> no ip address > > >> bridge-group 1 > > >> ! > > >> interface BVI 1 > > >> description bridge interface for bridge-group 1 > > >> ip address 192.168.254.x 255.255.255.0 > > >> ! > > >> bridge 1 protocol ieee > > >> bridge 1 route ip > > >> ------------------------------------------- > > >> > > >> > > >> Repeat the same basic setup on the 1602 at the other end of the > frame. > > >> > > >> Use exec command "show bridge verbose" and "show arp" to see if > your > > >> bridging is working as expected. > > >> > > >> Feel free to contact me if you need more help. > > >> > > >> > > >> > > >> -Rob > > >> > > >> > > >> > > >> At 06:17 PM 9/5/2003 -0700, you wrote: > > >> > > >> >I have a Cisco 2611 with a WIC-1DSU-T1 and a 1602 with a > > >> >WIC-1DSU-T1. I want to connect Ethernet0/1 of the 2611 to > > >> >my internal network and do transparent bridging across the > > >> >T1 frame to the 1602 and on to the Ethernet0 interface there. > > >> >The default gateway on the LAN is 192.168.254.1/24 and I'm > > >> >using a PPPoE device on the other end that will need to be > > >> >able to reach the LAN. > > >> > > > >> >It's theoretically a VERY simple configuration. I just have > > >> >little to no experience configuring Cisco routers. > > >> > > > >> >Kevin Summers > > >> >KISTech Internet Services Inc. > > >> >www.kistech.com > > >> > > >> ----------ANNOUNCEMENT---------- > > >> Don't forget to register for WISPCON IV > > >> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > >> > > >> The PART-15.ORG smartBridges Discussion List > > >> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > >> smartBridges <yournickname> > > >> To Remove: mailto:[EMAIL PROTECTED] (in the body type > > >> unsubscribe smartBridges) > > >> Archives: http://archives.part-15.org > > KS> ----------ANNOUNCEMENT---------- > > KS> Don't forget to register for WISPCON IV > > KS> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > KS> The PART-15.ORG smartBridges Discussion List > > KS> To Join: mailto:[EMAIL PROTECTED] (in the body type > > subscribe smartBridges <yournickname> > > KS> To Remove: mailto:[EMAIL PROTECTED] (in the body type > > unsubscribe smartBridges) > > KS> Archives: http://archives.part-15.org > > > > -- > > [This E-mail scanned for viruses by Declude Virus] > > > > ----------ANNOUNCEMENT---------- > > Don't forget to register for WISPCON IV > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type > > unsubscribe smartBridges) > > Archives: http://archives.part-15.org > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type > unsubscribe smartBridges) > Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
