Yes, you can use an aPPO to repeat the signal over an obstacle, however please remember that an aPPO in repeater mode its ethernet port is disabled for traffic, i.e. you will only be able to login to the unit for monitoring and managing purposes.
I hope that clarifies your questions. With Best Regards, Vasu -----Original Message----- From: Austin Hillrichs [mailto:[EMAIL PROTECTED] Sent: Wednesday, September 10, 2003 2:20 AM To: [EMAIL PROTECTED] Subject: [smartBridges] Some advice please. Can an APPo be used to repeat throughput over or around an obstacle? How? I have some customers that are NLOS but I do have LOS within half a mile of them... and LOS to them from that point. (Sorry to sound ignorant.) _____________________________________________________________ Free email from Immortal.com at http://www.immortal.com ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
