I've been developing a much larger tool for managing devices (SmartBridges and other manufacturer's devices in the same utility, think of it as similar to Alvarion's config utils but more feature-filled) Let me see how I can strip it down to only display the operational speed (possibly graph if that would help?) and get a version uploaded tomorrow. I believe (if I remember off the top of my head) that the OID for this is 1.3.6.1.4.1.410.1.2.1.8.0. So far this is what I have seen, with the value being one of 4 integers: 1=1MB, 2=2MB,3=5.5MB,4=11MB. Try doing an SNMP GET of this OID and see what you can come up with. Thanks, Brian McWilliams Senior Wireless Administrator - A Wireless Gateway http://www.awirelessgateway.com E-Mail: [EMAIL PROTECTED] Phone: 314-997-0300 x 2405 -----Original Message----- From: Nish Park [mailto:[EMAIL PROTECTED] Sent: Tue 9/9/2003 8:19 PM To: [EMAIL PROTECTED] Cc: Subject: RE: [smartBridges] How to get more thruput? Thanks guys for the suggestion. We have captured it and pass it on to the engineering team. Nish -----Original Message----- From: The Wirefree Network [mailto:[EMAIL PROTECTED] Sent: Wednesday, September 10, 2003 8:22 AM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] How to get more thruput? I WISH…I WISH…I WISH….SB COULD IMPLEMENT THIS?!?!? Put a feature in the aPPo that tells me what the aPPo is currently transmitting at (i.e. 11 or 5.5, etc) and on top of that, tell me which one of my clients is forcing the “fall back” from 11 Meg. I WISH…I WISH…I WISH!! This would tell me which of my clients I need to tweak to optimize the network. This is NOT, I repeat NOT, always the client with the lowest RSSI. It is not that easy. Sully -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blazen Wireless Sent: Tuesday, September 09, 2003 5:10 PM To: [EMAIL PROTECTED] Subject: [smartBridges] How to get more thruput? We have an APPO and ABO aprox 3.41 miles or less apart from each other. Best I can do to an internal server downloading a MP3 file (SHHHH) is aprox 1.3 meg. I have (had) the client radio set to RTS of aprox 800 set him to 2346 as a test and still was not any better. There was no heavy traffic on the network other then a few people on the same radio (APPO) as him we are talking total maybe 50kbps? Could it be that one of my further out customers (5-6 miles) is not getting 11 megs and keeping the radio at 1-5.5 megs at that speed and hosing it for the rest of the clients? What would be a test for that. Could there be some easy way to tell what the client is associated at so I can plan where to put more repeaters easier to set up to where I have every customer at 11 megs associated?? Thanks Martin & Steve Blazen Wireless www.blazenwireless.com
<<winmail.dat>>
