I think I can hack that. I'll try it out. _____
Jeremy _____ -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Wednesday, September 10, 2003 5:38 PM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] Managing network through routers Yes, this is possible. We run both public and private IPs on our network. Keep in mind that the routers themselves have no idea whether you're using public or private IPs--they have no concept of a public versus a private IP. To a router, an IP is an IP. To make this work, it's simply a matter of putting the appropriate routes in your routers so they can reach both the private and the public networks. Depending on what you're trying to do, you may also have to assign both a public and a private IP to certain router interfaces. Craig Quoting Jeremy Oswalt <[EMAIL PROTECTED]>: > So I assume from the "one" response, that this is possible. I'd like to > hear from Smartbridge, if possible. I'm sure others will need to know, if > they plan on managing a larger network. > > _____ > > Jeremy > > _____ > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] > On Behalf Of Jeremy Oswalt > Sent: Wednesday, September 10, 2003 8:33 AM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Managing network through routers > > I am using Mikrotik through-out. > > _____ > > Jeremy > > _____ > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] > On Behalf Of Tom Haynes > Sent: Wednesday, September 10, 2003 2:06 AM > To: [EMAIL PROTECTED] > Subject: RE: [smartBridges] Managing network through routers > > This scheme will not work with most SoHo routers since they will only allow > 1 subnet. You will need to use something like Microtik, StarOS or a > commercial grade router. > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] > On Behalf Of Jeremy Oswalt > Sent: Tuesday, September 09, 2003 8:14 PM > To: [EMAIL PROTECTED] > Subject: [smartBridges] Managing network through routers > > > I'm adding my second tower and instead of having one big subnet, I need to > add some routers. I think others on the list said they overlaid their > existing network IP's with private IP's. Can anyone verify that this > works, > especially through routers? I don't want to give public IP's to ALL my > devices. > > Internet => NOC => backbone => wireless AP > > I have a wireless link at the NOC too. Each => represents a router. I > don't care to route it to the internet, but just to the NOC. I currently > use 10.0.0.x. Can I route from the wireless AP to the NOC and still manage > the ABO's? > > _____ > > Jeremy > > _____ > > > > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges > <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
