Nish I have a question for you or board You do not recommend amps, this is correct??? The radios have a 60mw output, 17.8 dBi
To obtain a legal 36dBi output at the antenna, you do suggest going with a higher gain antenna The higher gain the antenna it is, the tighter the beam width We are presently using a 14dBi with an 8* vertical beamwidth We are wanting more penetration, a stronger signal Has anyone tried Hyperlink's HG2420P-120------19dBi--120*sector (6.5* vertical beamwidth) Thanks Joe K -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Nish Park Sent: Friday, September 19, 2003 11:51 AM To: [EMAIL PROTECTED] Subject: [smartBridges] For Lars Gaarden Hi Lars, Over past few days I have sent you a couple of emails but no response from your side. Please contact me with an alternate email address. Thanks. Nimesh Parikh smartBridges Pte Ltd ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
