Put a router on the other side of the sB device, between the sB device
an ANY of the client computers, and you are good to go.

Right?

Sully

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Lars Gaarden
Sent: Friday, September 19, 2003 9:26 AM
To: [EMAIL PROTECTED]
Subject: Re: [smartBridges] FW: Introducing the airPoint XO series from
smartBridges!

Nish Park wrote:

> I was thinking about a script that looks at your dummynet data and
apply
> the business rule (e.g. cut off the service after 5GB). This will then
> change the RADIUS profile.
> 
> Byte counters are easy to do in the radio (it may be already there).
The
> tricky part is what business rules to design into the unit. As
different
> people would have different requirements. 

That's one nitpick I have with the current firmware. It only provides
packet counters on the wireless interface. There are byte counters on
the ethernet interface, but they count all the traffic on the ethernet
side and not only the traffic being forwarded (say, if the customer
has 3 computers connected with a hub to the CPE, the ethernet byte/
packet counters will increase both for traffic going through the CPE
and traffic going between the 3 computers).

Not a big problem, since traffic counters can be fetched from the
PPPoE server or from MAC/IP traffic counters at the router.

-- 
LarsG

----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
Archives: http://archives.part-15.org  

----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org  

Reply via email to