BObby, Is this a newer abo with the slide switch for X over and straight thru cable on the POE? if so have you tried switching to X over I know sometimes it seemed to work for me..
Quoting Bobby Bounds <[EMAIL PROTECTED]>: > ....but WILL when connected directly to a NIC! > > Spent half the day today (at an install....ughhh) dicking around with this. > > > I setup an ABO at a car dealership.......connected it directly to my > PC....worked great. > > Then I plugged the ABO into the WAN port of a Linksys router. The link light > on the router did not even light up. Tried pinging thru the router....no > bueno. Tried another new router.....same problem. Re-crimped > everything....still no good. Tried three different POE's and power supplies. > Flipped the dumb little crossover switch on the POE a million times. Cycled > power on everything a million times.....no success. > > Factory reset the ABO .....downloaded latest firmware and > simplemonitor.....this made no difference. > > On one of the routers the WAN link light seemed at times to blink in cadence > with the activity light....but not consistently. > > The ABO is about a month old....came off a house where induced surge from > nearby electrical storms was present. > > Does anyone have any ideas? Did the surge somehow mess up the ethernet side > of the radio in such a way as to create these symptoms. Am I missing > something? What else should I be trying? > > Many thanks, > > Bobby Bounds > Airwave Internet, LLC > > Martin Moreno Blazen Wireless 909-907-4106 www.blazenwireless.com ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
