|
Hi Mike, When you set
authentication type to “External radius server”, internal MAC table
will not be in effective and no need to clear the internal MAC table. To make
use of the full functionality of the radius authentication, we recommend you to
use the firmware 1.4j.8 and above with simpleMonitor
1.60. Thank you -----Original Message----- I have two appo with the .j
firmware. 1. put a mac address in internal
table. auth works properly 2. change the mac in internal
table to invalid value. 3. set to radius auth pointing
to a radius server. 4. turn off radius server 5. change appo channel and
click reset, client dis-associates. 6. client re-appears within
seconds? Radius server is off. Does internal table have to be
empty? Remember, a valid mac is not in the table. |
