----- Original Message -----
Sent: Thursday, September 25, 2003 10:34
AM
Subject: RE: [smartBridges] AirBridges
and Bridging.
I've tried two other
ABOs at this location, and tried all
the different firmware
versions. I'm going to attempt one
more time today since
we just kicked one guy off that had
Nachi and was
broadcasting ping and NetBios packets all over
the
place.
I'll let you know how
it turns out. If we can't get the SB
radio working today
I'll be replacing it with a WET 11 to
see how that goes. I
just have to find a container to put
it in for
weatherproofing.
As for the ability to
get an address, but not ping the
gateway, I'm not sure.
Once I changed to a different
brand of radio I was
able to ping the gateway, and pull
up our HotSpot page. I
couldn't do that with the ABO in
place no matter what I
tried.
This could be
device specific problem. Have you tried to replace the unit? It is weird
that client can get an IP address but couldn�t go anyway, does it able to
ping to the accesspoint or gateway. As to the slowness, can it because of
the recent virus hit? The problem should be something else, if not
interference, collision, packet loss..
-----Original
Message-----
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Kevin
Summers
Sent: Thursday,
September 25, 2003 8:24 AM
To:
'[EMAIL PROTECTED]'
Subject: [smartBridges] AirBridges and
Bridging.
Well, after
fighting with this one connection for weeks
I finally decided
to swap the ABO for a different brand
of radio. While
it appears to be only able to pass one
MAC address in
client bridge mode, it's doing what it's
supposed to do,
and all the problems that we were having
A run down of the
problems..
- Client could
get an address from DHCP, but couldn't go
- PPPoE login
worked, but speed was VERY slow and sporadic.
- ABO worked
better with 0.09.10 firmware, but the slowness
was
killing the connection.
I tried changing
radios, I tried different firmware versions,
I spent a great
deal of time and money on various things trying
to fix this
problem. Nothing worked except a different radio.
Does anyone
happen to know if the WET11 will pass multiple MACs?
