I bought one about 1 year ago, it has no name on it, but the part number is: P/N 98-20015-01 I seem to remember the name of SOHO on it.
Scott -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kevin Summers Sent: Friday, September 26, 2003 4:02 PM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] Slow down problems I sympathize. I just did the same thing. Replaced the ABO at the client site with another brand of client bridge and all the problems went away and the throughput doubled. It turned out to be the fact that the Ethernet on the SB radios is Half Duplex, which I can't seem to find anything that doesn't cost $275 or more that supports that setting. Even the so called "managed" switches that I paid $88 each for say in their manual that they don't support 10Mbit Half Duplex. THAT is where I think the slowdown, and the problems are coming from. The radio that I replaced the ABO with has an Ethernet jack that is 100Mbit Full Duplex. I just think the wireless card in the radio is capable of switching from send to receive and back faster than the Ethernet chipset that SB is using. Kevin Summers KISTech Internet Services Inc. www.kistech.com > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Blazen Wireless > Sent: Friday, September 26, 2003 3:47 PM > To: [EMAIL PROTECTED] > Subject: Re: [smartBridges] Slow down problems > > > Well I have made up my mind I am going to buy an AP-1000 and throw it > back up on the tower which means I will have to get two more Ap-1000's > to replace at my other remote wipops that feed off the main APPO's! > and swap 3 APPO's at customers homes to an ABO or ABI since they wont > pass traffic unless associated to another appo! > > Money I dont have but I cant take this anymore I really feel its the > radios but not opposed to any other suggestions on what it could be? > > I am tired of trouble shooting left and right everytime I get 5-6 > customers online at once.. > > > ----- Original Message ----- > From: "Brendan O'Bra" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Friday, September 26, 2003 3:20 PM > Subject: Re: [smartBridges] Slow down problems > > > Stupid question, but... > > Have you tried taking the demarctech box out of the loop? > ----- Original Message ----- > From: "Blazen Wireless" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Friday, September 26, 2003 3:12 PM > Subject: Re: [smartBridges] Slow down problems > > > > I am using the bandwidth controller software from www.demarctech.com > > > > Isn't setting RTS to one going to shut down the customer?? > > > > > > ----- Original Message ----- > > From: "Kevin Summers" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Friday, September 26, 2003 3:10 PM > > Subject: RE: [smartBridges] Slow down problems > > > > > > > > Also, how are you throttling bandwidth per customer? > > > > Kevin Summers > > KISTech Internet Services Inc. > > www.kistech.com > > > > > > > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] Behalf Of Blazen > > > Wireless > > > Sent: Friday, September 26, 2003 3:01 PM > > > To: [EMAIL PROTECTED] > > > Subject: Re: [smartBridges] Slow down problems > > > > > > > > > I also forgot to mention I throttled the one big user down to > > > 100kbps > and > > > same think its like it has a hold on the APPO at 11 megs (5.5) > > > and wont let anything else talk to it?? > > > > > > > > > ----- Original Message ----- > > > From: "Blazen Wireless" <[EMAIL PROTECTED]> > > > To: <[EMAIL PROTECTED]> > > > Sent: Friday, September 26, 2003 2:59 PM > > > Subject: Re: [smartBridges] Slow down problems > > > > > > > > > Okay this slow down is really killing me I have all users turned > > > off > that > > > appear to be sending any kind of arp but this was not what was > > > causing > the > > > slowdowns. I have two users on right now one downloading at > > > 700kbps and the other one my slow customer just trying to surf and > > > cant due it due to > ping > > > rates we beyond out of control 300-400 and packet loss. > > > > > > I turn off the one customer who is downloading and the > problem resolves. > I > > > called the customer downloading and they are doing Microsoft > patches on > > > their machines right now so its not a virus. What gives why can > > > one > person > > > not taking up the full bandwidth screw the whole system I > mean every one > > > else is at a dead stand still?? > > > > > > To me this is a problem in the radio APPO not being able to > talk to two > > > radios at the same time at two different speeds this thing is > > > totally > just > > > sh**ing all over itself? > > > > > > Anyone else see this happen I had the APPO set to 1 meg only 2 meg > > > and > 5.5 > > > and also 11 but nothing seems to help! I have RTS set to 800 on > > > the clients and that made no difference I give up this customer > > > wants me to come > pull > > > the equipment.. > > > > > > Any ideas? > > > HELP! > > > ----- Original Message ----- > > > From: "Mark Radabaugh" <[EMAIL PROTECTED]> > > > To: <[EMAIL PROTECTED]> > > > Sent: Wednesday, September 24, 2003 6:02 PM > > > Subject: Re: [smartBridges] Slow down problems > > > > > > > > > This can get tricky. You need to be on a port that sees all of > > > the traffic - read that as 'not a switch port'. By definition a > switch will > > > only show you packets destined for your computer. > > > > > > If you really want to see what going on you need a hub or a > > > managed > switch > > > that can replicate all traffic onto a port. > > > > > > Another option is to use a wireless card in promiscious mode - a > > > mode where > > > you see all of the traffic. Ethereal will do this with (I > think) most > > > common wireless cards. > > > > > > Mark Radabaugh > > > Amplex > > > (419) 720-3635 > > > > > > ----- Original Message ----- > > > From: "Pascal Losier" <[EMAIL PROTECTED]> > > > To: <[EMAIL PROTECTED]> > > > Sent: Wednesday, September 24, 2003 5:41 PM > > > Subject: RE: [smartBridges] Slow down problems > > > > > > > > > > > > > > Just a small question, > > > > > > > > When running ethereal, Do you run it directly on the router > > > > (ex.Mikrotik) or on any system connected to the router. > > > > > > > > Also does it matter if the system running ethereal is log via > > > > PPPOE > ???? > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > From: [EMAIL PROTECTED] > > > > [mailto:[EMAIL PROTECTED] On Behalf Of Blazen > > > > Wireless > > > > Sent: Wednesday, September 24, 2003 6:12 PM > > > > To: [EMAIL PROTECTED] > > > > Subject: Re: [smartBridges] Slow down problems > > > > > > > > > > > > HAHA well then my router has the virus I get like over 2000 arp > request > > > > from the router in less then 20 min which I think is way out of > control > > > > it always is asking who has what IP etc. I was told this is > normal in > > > > order for the router to know what IP has what mac etc.. > > > > > > > > ----- Original Message ----- > > > > From: "Scott Damron" <[EMAIL PROTECTED]> > > > > To: <[EMAIL PROTECTED]> > > > > Sent: Wednesday, September 24, 2003 12:15 PM > > > > Subject: RE: [smartBridges] Slow down problems > > > > > > > > > > > > A WHOLE bunch of arp requests. If you run ethereal, you would > > > > see upwards of 30 or 40% ARP requests. Some of the viruses > > > > cause ARP storms. > > > > > > > > Scott > > > > > > > > -----Original Message----- > > > > From: [EMAIL PROTECTED] > > > > [mailto:[EMAIL PROTECTED] On Behalf Of Blazen > > > > Wireless > > > > Sent: Wednesday, September 24, 2003 12:09 PM > > > > To: [EMAIL PROTECTED] > > > > Subject: Re: [smartBridges] Slow down problems > > > > > > > > > > > > What do you mean check arp I know how to check it but what am I > looking > > > > for?? > > > > > > > > > > > > ----- Original Message ----- > > > > From: "Scott Damron" <[EMAIL PROTECTED]> > > > > To: <[EMAIL PROTECTED]> > > > > Sent: Wednesday, September 24, 2003 11:37 AM > > > > Subject: RE: [smartBridges] Slow down problems > > > > > > > > > > > > Check ARP. > > > > > > > > Scott > > > > > > > > -----Original Message----- > > > > From: [EMAIL PROTECTED] > > > > [mailto:[EMAIL PROTECTED] On Behalf Of Blazen > > > > Wireless > > > > Sent: Wednesday, September 24, 2003 11:17 AM > > > > To: [EMAIL PROTECTED] > > > > Subject: Re: [smartBridges] Slow down problems > > > > > > > > > > > > I have done that already and there is no ICMP other then me > > > > pinging > the > > > > radios It doesn't happen when there is no one online it only > > > > happens when a few close users get on and start to surf and then > the far users > > > > have a hard time with dropped packets and slow speeds and > high pings. > I > > > > just thing I need to open up another AP closer to them and keep > > > > my distance down to under 5 miles. The one person having the > hardest time > > > > is about 5.6 miles which is closer then my 7.2 mile customer who > > > > is doing great and pointed at the same radio APPO. It might > just be this > > > > person is in a bad area with more interference is what I am > > > > thinking > and > > > > I also may need to raise her ant a smidge.. > > > > > > > > > > > > ----- Original Message ----- > > > > From: <[EMAIL PROTECTED]> > > > > To: <[EMAIL PROTECTED]> > > > > Sent: Wednesday, September 24, 2003 11:47 AM > > > > Subject: Re: [smartBridges] Slow down problems > > > > > > > > > > > > Every time I've experienced interference (numerous times), it > > > > hasn't affected ping times. From what I've seen, it usually > > > > causes lost packets, but not high latency. I don't know if > > > > anyone has mentioned this before (I jumped in in the middle of > > > > this thread), but what > you're > > > > describing sounds exactly like something I experienced a few > > > > weeks > ago. > > > > I had about six users with the Welchia virus, and they were > > > > causing > high > > > > latency all over the network. If you haven't done it already, > > > > put a packet sniffer on the network, and see if you're seeing a > lot of icmp > > > > echo traffic. > > > > > > > > Craig > > > > > > > > > > > > Quoting Blazen Wireless <[EMAIL PROTECTED]>: > > > > > > > > > Well maybe this is not the problem now I am back to the > same issues > > > > > pings up to over 100ms and it seems now more with radios > that never > > > > > had problems before I am thinking more of interference > now? How many > > > > > of you have seen a drastic increase in SOHO wireless > routers popping > > > > > up on your site survey tab when setting up a customer, I s**t > > > > > you > not > > > > > one the other day had 11 > > > > that > > > > > all > > > > > said linksys or the default ssid for dlink stuff. Are those > > > > manufacturers > > > > > within spec it seems more and more are popping up and some > > > > > with > better > > > > > > > > > signal then my tower according to the site survey numbers > in the ABO > > > > /ABI > > > > > > > > > > > > > > > ----- Original Message ----- > > > > > From: "Scott Damron" <[EMAIL PROTECTED]> > > > > > To: <[EMAIL PROTECTED]> > > > > > Sent: Wednesday, September 24, 2003 9:07 AM > > > > > Subject: RE: [smartBridges] Slow down problems > > > > > > > > > > > > > > > Actually, it does not really drop everyone down to 1meg, it > > > > > just > _MAY_ > > > > > > > > > slow down the 11meg folks in order to respond to the 1meg > > > > > person. > Hope > > > > > > > > > that makes sense. > > > > > > > > > > Scott > > > > > -----Original Message----- > > > > > From: [EMAIL PROTECTED] > > > > > [mailto:[EMAIL PROTECTED] On Behalf Of The > > > > > Wirefree Network > > > > > Sent: Wednesday, September 24, 2003 9:08 AM > > > > > To: [EMAIL PROTECTED] > > > > > Subject: RE: [smartBridges] Slow down problems > > > > > > > > > > > > > > > Huh!??!? This seems bass ackwards. If one client associates > > > > > at 1 Meg, it drops everyone down to that speed. Not the other > > > > > way > around. > > > > > Weakest link theory. If a client can not associate at 11 Meg > > > > > and steps it's way down to 1 Meg, then it CAN NOT be forced to > > > > > connect > at > > > > > 11 Meg. However, a client who is close in with 100% RSSI, > > > > > could be stepped down to 1 Meg based on some far out client. > > > > > > > > > > Sully > > > > > > > > > > -----Original Message----- > > > > > From: [EMAIL PROTECTED] > > > > > [mailto:[EMAIL PROTECTED] On Behalf Of > Blazen Wireless > > > > > Sent: Tuesday, September 23, 2003 11:56 PM > > > > > To: [EMAIL PROTECTED] > > > > > Subject: Re: [smartBridges] Slow down problems > > > > > > > > > > I have throttling in place now thats not the issue. The > issue is in > my > > > > > > > > > opinion and theory is at what rate the radios associate > at.. If they > > > > > are only associating at 1 meg or less then yes you will have > > > > > throughput problems, if I have all my close customers able to > > > > > associate at 11 megs > > > > > (5.5) and my furthest customers only at 1 meg ( 500kbps) then > > > > > the further users are not going to be able to associate at 1 > > > > > meg but > will > > > > be > > > > > forced to associate at 11 megs and since that is not a stable > > > > > link > > > > they > > > > > will suffer as I kind of proved tonight but cant be 100% > sure unless > I > > > > > > > > > could verify what speed the users radios are associating at to > > > > > the > AP. > > > > > > > > > In theory the AP cant be associated to 3 to 4 radios all at > different > > > > > speeds. They will be associated at the speed of the > slowest radio or > > > > the > > > > > fastest depending on what radio has the best link I think? > > > > > > > > > > ----- Original Message ----- > > > > > From: Vasu (sB Tech Team) > > > > > To: [EMAIL PROTECTED] > > > > > Sent: Tuesday, September 23, 2003 11:27 PM > > > > > Subject: RE: [smartBridges] Slow down problems > > > > > > > > > > That's the basics of 802.11 std, when one user hogs the entire > > > > > bandwidth the remaining users have to share the bandwidth, > > > > > hence bandwidth throttling is important to ensure good and > stable links to > > > > > all users, I think the XO series access point should solve > > > > > your problem which can provide dedicated bandwidth to every > > > > > user. > > > > > > > > > > Vasu > > > > > -----Original Message----- > > > > > From: [EMAIL PROTECTED] > > > > > [mailto:[EMAIL PROTECTED] On Behalf Of > Blazen Wireless > > > > > Sent: Wednesday, September 24, 2003 2:02 PM > > > > > To: '[EMAIL PROTECTED]' > > > > > Subject: [smartBridges] Slow down problems > > > > > > > > > > Okay I think I have figured out the problem with my > system. It seems > > > > > that when users are one (close users) they are associated to > > > > > the > APPO > > > > > at 5.5 to 11 megs possibly and the users that are further away > > > > > are > at > > > > > 1 meg max well if you have the near users at 11 megs tying up > > > > > the radio and the far uses cant connect at a slower speed for > > > > > a better link / speed quality then the far users suffer? am I > > > > > correct in my theory does that make any sense? > > > > > > > > > > So going forward we are going to have to plan some more > sites closer > > > > > to the users having issues etc Has anyone else experienced > > > > > this. I cant verify 100% that this is true due to the fact the > radios don't > > > > > report what speed they are associated at? Can someone > think of a way > > > > > to validate this theory?? > > > > > > > > > > Thanks > > > > > > > > > > Martin & Steve > > > > > Blazen Wireless > > > > > www.blazenwireless.com > > > > > > > > > > > > > > > ----------ANNOUNCEMENT---------- > > > > > Don't forget to register for WISPCON IV > > > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > > > > > > > The PART-15.ORG smartBridges Discussion List > > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type > > > > > subscribe smartBridges <yournickname> To Remove: > > > > > mailto:[EMAIL PROTECTED] > (in > > > > > > > > > the body type unsubscribe > > > > > smartBridges) > > > > > Archives: http://archives.part-15.org > > > > > > > > > > > > > > > ----------ANNOUNCEMENT---------- > > > > > Don't forget to register for WISPCON IV > > > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > > > > > > > The PART-15.ORG smartBridges Discussion List > > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type > > > > > subscribe > > > > smartBridges > > > > > <yournickname> > > > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type > unsubscribe > > > > > smartBridges) > > > > > Archives: http://archives.part-15.org > > > > > > > > > > > > > > > > > > > > > > ----------ANNOUNCEMENT---------- > > > > Don't forget to register for WISPCON IV > > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > > > > > The PART-15.ORG smartBridges Discussion List > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > > > smartBridges <yournickname> To Remove: > mailto:[EMAIL PROTECTED] (in > > > > the body type unsubscribe > > > > smartBridges) > > > > Archives: http://archives.part-15.org > > > > > > > > > > > > ----------ANNOUNCEMENT---------- > > > > Don't forget to register for WISPCON IV > > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > > > > > The PART-15.ORG smartBridges Discussion List > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > > > smartBridges <yournickname> To Remove: > mailto:[EMAIL PROTECTED] (in > > > > the body type unsubscribe smartBridges) > > > > Archives: http://archives.part-15.org > > > > > > > > > > > > ----------ANNOUNCEMENT---------- > > > > Don't forget to register for WISPCON IV > > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > > > > > The PART-15.ORG smartBridges Discussion List > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > > > smartBridges <yournickname> To Remove: > mailto:[EMAIL PROTECTED] (in > > > > the body type unsubscribe > > > > smartBridges) > > > > Archives: http://archives.part-15.org > > > > > > > > > > > > ----------ANNOUNCEMENT---------- > > > > Don't forget to register for WISPCON IV > > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > > > > > The PART-15.ORG smartBridges Discussion List > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > > > smartBridges <yournickname> To Remove: > mailto:[EMAIL PROTECTED] (in > > > > the body type unsubscribe smartBridges) > > > > Archives: http://archives.part-15.org > > > > > > > > > > > > ----------ANNOUNCEMENT---------- > > > > Don't forget to register for WISPCON IV > > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > > > > > The PART-15.ORG smartBridges Discussion List > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > > > smartBridges <yournickname> To Remove: > mailto:[EMAIL PROTECTED] (in > > > > the body type unsubscribe > > > > smartBridges) > > > > Archives: http://archives.part-15.org > > > > > > > > > > > > ----------ANNOUNCEMENT---------- > > > > Don't forget to register for WISPCON IV > > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > > > > > The PART-15.ORG smartBridges Discussion List > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > > > smartBridges <yournickname> To Remove: > mailto:[EMAIL PROTECTED] (in > > > > the body type unsubscribe smartBridges) > > > > Archives: http://archives.part-15.org > > > > > > > > > > > > > > > > > > > > ----------ANNOUNCEMENT---------- > > > > Don't forget to register for WISPCON IV > > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > > > > > The PART-15.ORG smartBridges Discussion List > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > > smartBridges <yournickname> > > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type > > > > unsubscribe > > > smartBridges) > > > > Archives: http://archives.part-15.org > > > > > > > > > > > > > ----------ANNOUNCEMENT---------- > > > Don't forget to register for WISPCON IV > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > > > The PART-15.ORG smartBridges Discussion List > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] > > > (in the body type unsubscribe > > > smartBridges) > > > Archives: http://archives.part-15.org > > > > > > > > > ----------ANNOUNCEMENT---------- > > > Don't forget to register for WISPCON IV > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > > > The PART-15.ORG smartBridges Discussion List > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] > > > (in the body type unsubscribe smartBridges) > > > Archives: http://archives.part-15.org > > > > ----------ANNOUNCEMENT---------- > > Don't forget to register for WISPCON IV > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] > > (in the body type unsubscribe > > smartBridges) > > Archives: http://archives.part-15.org > > > > > > ----------ANNOUNCEMENT---------- > > Don't forget to register for WISPCON IV > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > > Archives: http://archives.part-15.org > > > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the body type unsubscribe > smartBridges) > Archives: http://archives.part-15.org > > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in > the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
